Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ front end noise

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 44
Joined: Wed Nov 20, 2002 7:10 pm
Location: Brisbane

MQ front end noise

Post by lyall »

Hey Guys

When in 4hi and doing over 35km/h and i back off the accelerator the car makes a fairly bad noise from the front and or tranfer case area which is hard to discribe. But if i apply the brakes the noise goes.

Any ideas?

Thanks

Reece
Wanted: MQ ute body
Top
Posts: 86
Joined: Sat Nov 08, 2003 2:02 pm
Location: yarrawonga northen victoria

Post by buger man »

first thing to check is the sliding spline in the tailshaft (check the unies whileyour there for play) :?
2001 pathfinder tjm(nissan ) alloy b/bar hella 160 d/lights ARB h/light loom , ipf d/light loom GME TX3400 UHF , 2 power outlets in back

www.yarrawongamulwala.com.au
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

also, if you have the L28 4 speed, with the double Cardin in the front tail shaft, check that for play also, as i had those dramas with mine had to get a new cardin joint fitted up,
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

mate,

if it doesnt do it at all when you back off in Hi 2....

then its the front drive shaft slide on the spline...

mate grease it up until it doesnt move...

see if it still does it as bad...

basically it needs new seals etc on the shaft spline, or a new shaft thats not sloppy.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 44
Joined: Wed Nov 20, 2002 7:10 pm
Location: Brisbane

Post by lyall »

thanks guys, will get the grease into it this weekend and see how she goes.

Thanks again.

Reece
Wanted: MQ ute body
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests