Just wondering about using a 1.6 vit short motor and puting my g13ba head and parts on that? can you do this conversion and what year 1.6 would be best?
Chop
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.6 short motor?
1.6 short motor?
I THINK ICAN, I THINK I CAN!
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}
Search search search 
As for what year well any one that comes from an 8v not a 16v so G16A
You want this so the piston match the head... other wise it's virtually the same as any other 1.6 conversion.. engine mounts and adaptor
(i have never done this so someone jump in and correct me if i'm wrong)
Still haven't got a definite yes or no on whether the cylinder head volumes are the same on the different between the g13 and g16 heads. If the g13 was smaller it would be good as it would increase your compression, the bad thing is your valves are definitely smaller
As for what year well any one that comes from an 8v not a 16v so G16A
You want this so the piston match the head... other wise it's virtually the same as any other 1.6 conversion.. engine mounts and adaptor
(i have never done this so someone jump in and correct me if i'm wrong)
Still haven't got a definite yes or no on whether the cylinder head volumes are the same on the different between the g13 and g16 heads. If the g13 was smaller it would be good as it would increase your compression, the bad thing is your valves are definitely smaller
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Who is online
Users browsing this forum: No registered users and 1 guest