Hi all, Just a question on removing my transfercase from auto trans.
Do I have to take out the auto to remove the transfer case or can it be done by just removing the cross member and unbolting the tranfer case while the trans is still on the car.
Also can any body give me a rough idea about how many hours labor I would be looking at if I got a mechanic to do the change over of the transfer case??
Cheers
Glenn
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Taking off transfer case
Moderator: -Scott-
For a mechanic to do it $300-350.
You can remove the t/case from the auto with it still in the car but it's very fiddly, best with a few mates to help.
We did a 5sp that had a 2" body lift (makes it a lot easier) without it I'm sure the gearbox & t/case would have had to come out together.
You can remove the t/case from the auto with it still in the car but it's very fiddly, best with a few mates to help.
We did a 5sp that had a 2" body lift (makes it a lot easier) without it I'm sure the gearbox & t/case would have had to come out together.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 0 guests