Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

drag link hitting u bolt

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 111
Joined: Tue Jan 11, 2005 6:50 pm
Location: canberra

drag link hitting u bolt

Post by kegz »

hey i urgently need help my old luxs drag ling hits the u shackle, the car has been lifted i think, not body lift. is there somethoing i can do to get it to miss the u bolt it only needs about 5mm
Top
Posts: 391
Joined: Wed May 26, 2004 6:20 pm
Location: Seaham NSW

Post by My Lil Lux »

Has it got standard drag link (straight) or a dropped draglink, like this.....

(P.S. this one is for sale $70, 0402 894 355 :lol: )
You do not have the required permissions to view the files attached to this post.
Try not to let your mind wander...It is too
small and fragile to be out by itself.
Top
Posts: 66
Joined: Fri Feb 11, 2005 2:36 am
Location: Sydney

Post by soo33y »

Have you checked to see whether the ball joint between the steering knuckle and the drag link is ok ?

On my LN106 the ball joint was distorted out of shape and this was the reason the drag link was hitting the u bolts...

Check yours ? Is there much free play in your steering ?
Top
Posts: 111
Joined: Tue Jan 11, 2005 6:50 pm
Location: canberra

re

Post by kegz »

yes i have the standard drag link (straight) and i have checked ball joints and they are all good, how hard are these square flattened u bolt to get
Top
tys
Posts: 38
Joined: Tue May 04, 2004 7:07 pm
Location: Brisbane

Post by tys »

You might of already fixed it by now, but if you havent this might help. Check the swivel hub bearings, my wheel was tilting inwards at the top which pushed the steering arm over causing the drag link to hit. The bottom bearing was totally stuffed. Anyway hope u have it fixed.
Do it in the Dirt

Jeep TJ, lifted, locked and all the goods
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 4 guests