Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
transfer gearing
Moderator: Micka
transfer gearing
i have heard that by changin a cog in my transfer case i can up the gearin so my car doesnt scream its nut off at 110 km/h...is this true?
i assume you have a series land rover ?
if so, you can get a high speed transfer case gearset, which also requires a modified case. i did this - cost $800 diy kit, comes with a changeover case. I am happy with it but its not money well spent imo.
if so, you can get a high speed transfer case gearset, which also requires a modified case. i did this - cost $800 diy kit, comes with a changeover case. I am happy with it but its not money well spent imo.
Ex-Army - SeriesIII -186s - NP435 - Maxi rear - megasquirt coilpack ignition - AM FM radio with 2 X speakers
Re: transfer gearing
Yours is a 4spd 2dr right ? you can change the high range set in the lt95 transfer for a 0.993 / 1 or something close as opposed to the 1.13/ 1 you would have now - if yours has a hi comp 3.5 then you have this already.big_yella wrote:i have heard that by changin a cog in my transfer case i can up the gearin so my car doesnt scream its nut off at 110 km/h...is this true?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Who is online
Users browsing this forum: No registered users and 33 guests