Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Bonnet Advice!

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

Bonnet Advice!

Post by Crawford »

need some advice.. my bonnet has faded paint... and has a 5cm^2 rust hole in the middle where the little hook thing is..

I can get a bonnet from the wreckers in perfect condition but it has maroon paint on it.. will cost me about $100.. i was going to buy this and paint it black?
will i have to scrap the old paint off it or what? and will a black bonnet on a sierra look ok? i would put a SUZUKI white sticker on it to break up the black a bit i was thinking!

other option is, is a bonnet scoop and paint my current bonnet.. not sure how much this will cost.. and bonnet scoop might look a bit stupid on a sierra..

OR.. i can get them to fibre glass the hole in my current bonnet but they are worried when they doing some welding its going to be to hot and its going to warp the whole bonnet.. and they said it will only last 1 - 2 years.

There is a bonnet which is the same colour as mine at suziwest but it is also faded and they are asking $300 for it..$300 to fix a rust spot seem sa bit steap.. buyin a good condition bonnet for $100 and painting it black until i can afford the original colour seems a better option?

Let me know fellas

cheers
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Do it. Buy the block out black and spray it matt black ricer style. You can always paint it the correct colour with spray packs.

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

Post by Crawford »

you mean spray it with the correct colour later or just do the correct colour straight away?

How hard would it be to find 27G (greeny blue) colour for my 87 sierra!
is it expensive to buy paint?

Cheers
BEn
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

Crawford wrote:you mean spray it with the correct colour later or just do the correct colour straight away?

How hard would it be to find 27G (greeny blue) colour for my 87 sierra!
is it expensive to buy paint?

Cheers
BEn
A darkish blue sierra would look great with a black bonnet, in my opinion. If it looks cr@p then spray it later. Won't have to be an exact color match, as I bet your paint has faded differently on all bits of the body.
$100 is a good price for a good bonnet.

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

Go the black first as you will have to anyway i think to spray your colour. Is yours metallic? similar colour to the 91's

If u dont have access to a spray booth or airgun, u can but the pressure pack mixed to your colour for about $15 i think. 2 cans i am guessing would do a bonnet and then a clear coat on top.

cheers

Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

Post by Crawford »

yeh its a metallic paint.. which im surprised for a 87 car..

i bought the bonnet.. im going to try and sell my old bonnet for $50 as apparently someone that can weld and do a patch up job could make it as good as new so im hoping someone will pick tha tup and that should pay for my paints!

thankxs for all your help fellas
Posts: 583
Joined: Sat Sep 24, 2005 7:38 pm
Location: Central West-NSW

Post by Vineboy »

I spent 80 bucks on a "killrust" paint (golden yellow) and sprayed my whole ute. Came up a treat with the added bonus that rust is kept at bay....sort of.
84 Toyota HJ47-98 MK Triton-2011 Kluger- 2010 Triton (Work)-Suzuki DL650-Suzuki DRZ400-Honda CRF250X
Posts: 912
Joined: Tue Nov 09, 2004 6:29 pm
Location: {Sydney, Australia or Rio, Brazil Ride: Sierra JXi}

Post by Santos »

Buy paint stripper and remove all the old paint, paint rust convertor and sand where nessesary then paint with Black coloured auto primer.

Trust me it's worth a little extra effort and gives you a good base for the later colour
-[b]Santos[/b][img]http://www.teamswift.net/images/smilies/icon_furious.gif[/img]
Suzuki, Jeep & Toyota Soft tops with welded seams for SALE (PM me)
Posts: 239
Joined: Sat May 21, 2005 8:30 pm

Post by Crawford »

when i go in to get my paint mixed.. well they match it to the fade of the other panels next to the bonnet?

it is a metallic paint will that cost more?

Shouldnt i try and sand the paint off? or its better to use paint striper and then sand it down?

cheers
Posts: 434
Joined: Wed Jul 13, 2005 10:07 am
Location: Gold Coast

Post by waxhead.. »

They will eye match it, it wont cost much, just get a spay can mixed up, paint some primer over the bonnet you are buying, then paint it the right colour.
Posts: 1958
Joined: Thu Sep 01, 2005 11:01 pm
Location: Nowra, NSW

Post by chunkz »

not sure if this is what you want
but hey
http://cgi.ebay.com.au/Suzuki-Sierra-Bo ... dZViewItem
Posts: 575
Joined: Sun Mar 13, 2005 9:09 pm
Location: Kingston, Tas

Post by derelict_frog »

AFAIK the early bonnet wont fit on 1.3s as its missing a lump in the middle for the engine block.
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Post by christover1 »

derelict_frog wrote:AFAIK the early bonnet wont fit on 1.3s as its missing a lump in the middle for the engine block.
very true, good point.
Tho with a body lift they can, of course.

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Posts: 575
Joined: Sun Mar 13, 2005 9:09 pm
Location: Kingston, Tas

Post by derelict_frog »

A friend put a 2" body lift in and i think it still hit :/
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

The Power Bulge. :rofl:

cheers
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 286
Joined: Tue May 31, 2005 11:13 pm
Location: Perth WA

Post by smileysmoke »

ahaha :) i thought the bulge was from extreme horses pushing it up? :D
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

derelict_frog wrote:A friend put a 2" body lift in and i think it still hit :/
nah they fit, ive still got the one from the fire station sitting at my house, didnt want to put it on tho as doesnt have the power bulge
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Posts: 575
Joined: Sun Mar 13, 2005 9:09 pm
Location: Kingston, Tas

Post by derelict_frog »

Ah thats all good then! heh..
Posts: 87
Joined: Mon Apr 19, 2004 7:48 pm
Location: QLD...Where else would you want to live??

Post by Whitey »

I have the exact same colour zook as you, and I have a matt black fibreglass bonnet on mine, and it looks great. (helps heaps to if you have roof mounted spotties) If you send me your e-mail address I will send you some pics. I got an ARB sticker, and a metallic blue SUZUKI sticker to break it up a bit...
92 Sierra
Toyota 4AGE
2 inch body lift
2 in Dobinson springs
31 Bfg's A/T
Rear ARB locker
Sliders
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests