Howdy,
i recently bought a 68' J200 4x4 as a project vehicle , it has a 232 , 4 speed box & a Dana 20 case.
I am using the driveline from a 82' cherokee ( AMC 360 , TF 727 ) that i had , alot of people retain the D20 case which i want to keep in there . Have a 208 - but the output to the front axle is on the different side & doesn't match the frontend ,(unless a 241OR Rock-trak comes along )
I want to mate it up to the torque flite - does anyone have or know of the conversion part/kit that mates the two ???
Any help would be greatly appreciated
cheers
Rick
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
mating D20 T/case to TF 727 transmission ?
Moderator: GUtripper
Re: mating D20 T/case to TF 727 transmission ?
Iam i bit confused you have a D20 on the back of a T18 spd and a 208 on the back of a tf7727.Xtremitys wrote:Howdy,
i recently bought a 68' J200 4x4 as a project vehicle , it has a 232 , 4 speed box & a Dana 20 case.
I am using the driveline from a 82' cherokee ( AMC 360 , TF 727 ) that i had , alot of people retain the D20 case which i want to keep in there . Have a 208 - but the output to the front axle is on the different side & doesn't match the frontend ,(unless a 241OR Rock-trak comes along )
I want to mate it up to the torque flite - does anyone have or know of the conversion part/kit that mates the two ???
Any help would be greatly appreciated
cheers
Rick
Yay or nay
Eric
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
conversion kits
its a shame you dont have the cherokee driveline that has a th400 as i have an adaptor for the th400 to the d20 case. i do know that marks does adaptor kits for these combos but they are in the old advance adaptors range so it takes some searching..
other than that u could pickup a th400 amc pattern box and buy my adaptor if it suited
goodluck mate
other than that u could pickup a th400 amc pattern box and buy my adaptor if it suited
goodluck mate
If you come home from a day wheelin and nothing is broken then you wussed out all day!
You may need to get a tail housing from a TF727 inc bull gear.Xtremitys wrote:- NP 208 is out of the cherokee ( AMC 360 > TF 727 > NP208 ) that i have , wrecked the cherokee for parts .
- dana 20 is in the J seies ( AMC 232 > T18 > D20 ) is my current project , plan to take out the 232 & T18 and replace them with the AMC 360 & TF 727 , leaving the D20 there !
Eric
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
Good choice have heard a lot of good thing about the 401.Xtremitys wrote:sold 727 & NP 208 , now committed at going manual ( T18 which i have & splitter ) and strong possibilitydropping the 360 in favour for a AMC 401 !
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
Who is online
Users browsing this forum: No registered users and 3 guests