Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Just wondering how many people have added 30mm spacers to get that extra lift?
My weekend muddies touch when under flex.
My Mav runs both sway bars as it is lovies car to drive the kids in and my weekender.
31's on the road and 32's for weekend.
It's also got 50mm spring lift.. New shocks are comming soon so will be a bit longer to suit if I go through with it.
had no probs with mine either, popped them in to get a bit more life outter my coils. just make sure your shocks r the right length so they cant get out.
Got em in the rear of my GQ to level things up, front springs are set up for extra weight of a winch which isn't in there yet so it sits a bit higher in front without spacers in the back. Never had an issue, you wouldn't even know they were there.
What about drive angles brake line lenghts and stuff like that 30m spacer + 50mm springs = 80mm/3+inches.
I'm just trying to find out what else I'll need to do if I put them in.
No problems with mine. You won't get a full 30mm lift, as the coil will compress into the packer/spacer a small amount. Discussed them with DOT, they didn't have a problem, Inspection officers also have approved them in the past.
