Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rocky gearbox problem

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 6
Joined: Fri Nov 11, 2005 9:41 pm
Location: Kuala Lumpur - Malaysia

Rocky gearbox problem

Post by vestax »

Hi guy's , recently im having a hard time engaging into 2nd gear , which i thought the clutch was worn out , so yesterday i had the gearbox taken down , and the clutch was pretty okay after 5 years of abuse by doing lots of offroad & travelling . The pressure plate is pretty worn out , which we all assume that was the culprit as the clutch couldnt disengage . So i had bought the exedy full clutch assembly which includes pressure plate , clutch disc , thrown out bearing , pilot bearing & flywheel oil seal . Changing the clutch didnt help at all , the problem still exist .

So right now im suspecting its the synchromesh that is the culprit , is there any other cheap fix solution ? cause i just wasted hell lots of money on the clutch and im kind of broke now . Im not sure of the gearbox code , but im using a 3Y engine , any idea or advice ?.

here's a picture of my 5 year old aisin clutch , its still thick , probably can last another 20,000km ..

Image
Top
Posts: 17
Joined: Fri Mar 11, 2005 3:22 pm
Location: South Australia

Post by dfroog »

I had problems with 2nd gear a couple of years ago, but when i changed the oil the problem went away.
Cheers
DFROOG
Top
Posts: 4
Joined: Fri Nov 11, 2005 7:12 pm

Post by daihatsu_man »

i had that too, couldn't change from 3rd - 2nd, but could go from 1st-2nd. Was the synchromesh, one worn heaps, another actually snapped :shock:
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

Change the oil to a good brand.. I recommend "Redline Lightweight Shockproof Oil".. or change and put an additive in: "Nulon Gearbox Treatment". Works wonders... if them two dont fix it... not much will
Top
Posts: 6
Joined: Fri Nov 11, 2005 9:41 pm
Location: Kuala Lumpur - Malaysia

Post by vestax »

The only way for me to engage to second gear , when im its standstill , shifting the gear without clutching in at slow speeds or revving the engine hard at first gear and it goes in smoothly in to 2nd . The problem now is , dropping the gears from 3rd to 2nd is really making it hard to drive the rocky .

Is there any other similiar gearbox which i could use ? cause rocky parts is hard to get , if there is its gonna cost a bomb .

By the way i had change the gearoil while i did the clutch replacement , so changing to a thinner gearoil might help ?. I`ll see if i could find one .

Thanks
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 2 guests