Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Which Air Compressor ?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Which Air Compressor ?
I want to purchase a good on-board air compressor, and have pretty much narrowed my choices down to a Clisby or Endless Air. Any other advice would however be welcomed.
Can anyone point me towards an Aus online webstore from which the same can be ordered. Have seen Clisby's offered at Big Balls, but no luck with Endless Air.
Can anyone help with a telephone number check for Kareela Engineering (Endless Air) the numbers supplied are about as much use as a one legged man at an arse kicking party -
PH: 03 9584 4785 (Permantley engaged, or off the hook)
FAX: 03 9584 5837 (Loop of "you are being connected").
With thanks,
Leithfield
Can anyone point me towards an Aus online webstore from which the same can be ordered. Have seen Clisby's offered at Big Balls, but no luck with Endless Air.
Can anyone help with a telephone number check for Kareela Engineering (Endless Air) the numbers supplied are about as much use as a one legged man at an arse kicking party -
PH: 03 9584 4785 (Permantley engaged, or off the hook)
FAX: 03 9584 5837 (Loop of "you are being connected").
With thanks,
Leithfield
The endless air is the way to go, but I wouldnt buy one, build it yourself. If your 4wd isnt air coned then grab a mount and drive pulley from a wreck then buy a Sanden compressor. Tap a thread into the sump plug to suit a grease nipple. There are a number of ways you can wire it in.
Mud makes excellent toothpaste.
Posts: 3523
Joined: Sun May 18, 2003 8:42 pm
Joined: Sun May 18, 2003 8:42 pm
Location: Somewhere they can't reach me, shoot me or electrocute me...
Next question, what do the Sanden pumps come out of? I was thinking of using a pump from a hilux 2L diesel as these seem to be a compact unit, but I'm not sure if the pump internals have a separate sump or if they are oiled from the air supply. from there I would just filter off the oil/water emulsion with a coalescing filter. RUFF?
Built, not bought.
Wooders wrote:I nominate a York.......
100% Agree. I think i have one lying around somewhere. Would have to have a look.
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
I would be fitting either a york or sanen AC pump.
Another option in this site.
http://www.roverworld.com/extreme_aire_english.htm
Michael.
Another option in this site.
http://www.roverworld.com/extreme_aire_english.htm
Michael.
Mitsubishi 2010 NT DID Pajero wagon, Factory rear diff lock, Dual batteries, ARB bar, winch, Mt ATZ 4 rib tyres.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
1986 RR.
Custom suspension links etc.
HSV 215 engine.
4.3 diffs.
Who is online
Users browsing this forum: No registered users and 0 guests