Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Snorkel Install on Hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 30
Joined: Sun Jun 26, 2005 5:45 pm

Snorkel Install on Hilux

Post by @cer »

Hey guys,

Im in the process of fitting a Safari Snorkel to my LN106R 2.8D Hilux and have hit some problems.

Firstly, does anybody have a template for where to drill the holes?

Secondly, I have taken the left front guard off the car and behind it is a steal tank looking thing which has a small hose which runs into the air intake hose which is already on the car. What is this? Can it be removed? Does it need to be put back or modified? If so, what do I do about it?

Thanks guys appreciate the help heaps.
Top
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Contact:
Contact +dj_hansen+

Post by +dj_hansen+ »

Does you Lux have push button high range? if so, that steel tank thing would be the vacuum reserve tank for the ADD (push button high range)
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Top
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

to do a snorkel its better to have the guard on the car ,thats how the fitters do it anyway ,
your better to paint where the holes have been cut than use the rust proofing shit they give u too as it eventually washes off
Top
Posts: 30
Joined: Mon Jul 11, 2005 5:35 pm
Location: Brisbane

Template

Post by boogdude »

Not sure on the tank in the guard, but with the template, i just rang tjm (as mine is an airtec) and they sent me one out in the mail. Yours being safari, just find the biggest wholesaler closest to you and give them the serial number on the snorkel and they should send you one out.

Good Luck
Top
Posts: 282
Joined: Sun Oct 27, 2002 9:15 pm

Post by BeZeRK »

do the install on the car

easiest way to drill the smaller holes is with a step drill, and most installers would throw the temps out after fitting so you might need to call safari direct..

ill check my toolbox, i may still have one in tha back somewhere?
Top
Posts: 30
Joined: Sun Jun 26, 2005 5:45 pm

Post by @cer »

+dj_hansen+ wrote:Does you Lux have push button high range? if so, that steel tank thing would be the vacuum reserve tank for the ADD (push button high range)
No, it doesnt have a push button for highrange... Its a manual locking hubs...
Top
Posts: 30
Joined: Sun Jun 26, 2005 5:45 pm

Post by @cer »

""UPDATE""

I removed the tank and it seems like it is some form of tank which is used as an overflow point in the air intake system incase water is sucked in... The tank has a drainage pipe on the bottom of it so the water drained from the air intake tube is then able to drain from the tank...

Sound like it?
Top
Posts: 282
Joined: Sun Oct 27, 2002 9:15 pm

Post by BeZeRK »

yea, and it would have a weird foam at each end to dodgily seal it?????

you should use a small amount of silicon to seal the snorkel properly and silicon up th drain hole in the airbox.. it gets messy!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 10 guests