Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Hub Seals?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

GQ Hub Seals?

Post by CJ Burns Esq »

Ok, I have my new hub seals, the ones that fit into the disc brake rotor on the diff side of the rotor.
Question is which way round do they go in?

The seals have an "L" profile metal bit in them. Does the base of the "L" go into the rotor?
Yeah I know, "Put 'em in the same as the old ones". Trouble is I don't trust that the last lot were put in correctly and I'd rather ask the question and get it right, rather than find out the last guy did it wrong.
cheers,
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

Springs to the inside

Bazzle
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

sPRINGS?
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 120
Joined: Wed May 04, 2005 9:55 pm
Location: Out dropping a patch! :)

hi

Post by LUCIFER »

hi, there is a double lip side to the seal. this needs to be sealing against the stub. the other side as shown should be tapped into the rotor hub..


(the top picture is the double lip)
hope this helps..
cheers
You do not have the required permissions to view the files attached to this post.
WANTED:?? always buying stuff. what have you got? 0400 077 117,
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

Ah ha, A picture tells a thousand words.
thanks gents, see how I go.
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

I note the presence of Rubber grease as well (the pink stuff) Is that recommended? or just go for High Temp Bearing (HTB) grease all over it?
CJ
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Top
Posts: 120
Joined: Wed May 04, 2005 9:55 pm
Location: Out dropping a patch! :)

Post by LUCIFER »

CJ Burns Esq wrote:I note the presence of Rubber grease as well (the pink stuff) Is that recommended? or just go for High Temp Bearing (HTB) grease all over it?
CJ
if its a new seal it should already be pre lubed but HTB or rubber grease will do the trick. good luck

cheers
WANTED:?? always buying stuff. what have you got? 0400 077 117,
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 69 guests