Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

winches

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 159
Joined: Fri Apr 22, 2005 7:57 pm

winches

Post by 81 rangie »

i have just taken the winch apart that was with the car when new, was just wondering if it is alright to usemarine bearing grease, as it would provide good protection when it gets wet in there. the wimch was full of crap and the grease had dried out
Posts: 159
Joined: Fri Apr 22, 2005 7:57 pm

Post by 81 rangie »

oh yeah another thing i was wondering is if it is missing the hook on the front, can i just get a 4.7 ton shackle, or is it better to use try and find a hook
Posts: 109
Joined: Thu Aug 26, 2004 9:45 pm
Location: SE Melbourne, Australia

Post by rlaxton »

Just go out to a rigging place and buy a proper rated, positive locking hook. The sort that the more tension on it, the harder it is to open is what you want. There are models with and without swivels built in. Most people seem to be using the one without swivel because otherwise the cable can unravel under tension I hear.

Richard.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests