Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lock right diff locks.

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

lock right diff locks.

Post by 460cixy »

i have had a search around outers and then net with no joy. are lockright style auto locking diffs available for early rangies?
range rover & series one landy!
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Yes
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 10984
Joined: Thu May 29, 2003 3:47 pm
Location: Bum drilling with my buddy Ray!

Post by GRIMACE »

not reccomended for the front, bein full time 4wd.

rear should be fine. but may cause slight clunkin sounds and also pull under early or hard acceleration.
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

sweet any idea on the cost? and where to get one. i guess my local diff place should be able to get one in? do thay replace those weak as piss side gears?
range rover & series one landy!
Posts: 36
Joined: Wed Apr 13, 2005 9:00 pm
Location: Melbourne

Post by lariens »

Wouldnt touch! They are cheap for a reason because the locking mech moves on the axel and basicaly wears out the splines until they bust.
People say there a little noisy well they actualy bang. Had one in a cruiser.
Posts: 27
Joined: Fri Mar 04, 2005 6:46 pm
Location: UK

Post by Lao Tsu »

Go for True tracs instead much better, similar money
No-body knows everything, the fun is trying to...
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

cheers for the advice fellas. i just found info on the trutrac its an lsd i realy want a locker but not going to shell out the coin for an arb to go in a weekend 10 spline warrior how ever would work tops in the front.
range rover & series one landy!
Posts: 27
Joined: Fri Mar 04, 2005 6:46 pm
Location: UK

Post by Lao Tsu »

460cixy wrote:cheers for the advice fellas. i just found info on the trutrac its an lsd i realy want a locker but not going to shell out the coin for an arb to go in a weekend 10 spline warrior how ever would work tops in the front.
I have experienced the 'joys' of a detroit before as well as the benefits. When I was offered a delivery damaged Truetrac for peanuts I was a bit unsure - LSD's have some odd quirks.

I have had it in the back of my RaRo for about 5k miles now, with about 1k miles off road. It's great. No unpleasantnesson the tarmac and just what the Doctor ordered off road. It works well on rock, in mud and on sand. Coupled to a mild disclocation system on the rear it means I don't have to run so aggressive a tyre (just MT's ) to get as far as I want.

I would suggest caution with chucking one in the front - I did just that with a Quaife LSD and it made fast driving on wet tarmac/loose gravel roads a bit interesting - especially the corners!
No-body knows everything, the fun is trying to...
Posts: 243
Joined: Mon Sep 26, 2005 10:19 pm
Location: Nhill vic

Post by Rangie Thing »

I also had a lockright in a cruiser, took a bit to shim up, to get it right and about 3 months later blew a tyre at 100k on the sealed road and the lockright didn't like that one bit.
And then driving down the road it would just let go without warning and it make the cruiser sway alot. a air locker is the only way to go.
Posts: 27
Joined: Fri Mar 04, 2005 6:46 pm
Location: UK

Post by Lao Tsu »

Rangie Thing wrote:. a air locker is the only way to go.
To be honest the only way to go is G-wagon axles with hydraulic in/out lockers.

One day....
No-body knows everything, the fun is trying to...
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Lao Tsu wrote:
Rangie Thing wrote:. a air locker is the only way to go.
To be honest the only way to go is G-wagon axles with hydraulic in/out lockers.

One day....
Not really (or not without a lot of problems...)

G-Wagon axles are only about the same strength or marginally stronger than Rangie axles (diff centres are stronger).
The front axle on a G-wagon spins in the opposite direction to a rover diff (and most normal diffs) - so you need to fit a g-wagen transfer case if you want it to work.
G.wagen axles are semi-floating (at least rear and I think front too), so if you break an axle you lose the wheel.

There are MUCH better options out there.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 27
Joined: Fri Mar 04, 2005 6:46 pm
Location: UK

Post by Lao Tsu »

It depends on what you want to do with it


A G axle will run 500hp and 35" Simex tyres with little or n worrie , so me wanting a Merc lump 170bhp derv burner, auto box, t-box and axles in a vehicle that will never run bigger than 31's. And I get a difflock that will force in and out....

I get my buzz out of long distance travel to remote areas and running/marshaling at events.

Why would I want to ruin my vehicles handling characteristics with Portals when I don't need them, what good are portals on remote tracks in the Sierra Nevada or at Wadi Rum? It's like running Simex ET's when all you do is a few tracks and trails and a couple of non comp events a year!
If I inclined to serious rock or say the Ladoga Trophy, then portals (russian military) and 44'x would be my thing. Each to his own but don't knock it until you have tried it.
If LC or GU axles were more common over here I would go down that route, but G stuff is easier to get. Hell I might even just buy a G and give the RR to the wife!
No-body knows everything, the fun is trying to...
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Lao Tsu wrote:Hell I might even just buy a G and give the RR to the wife!
That seems a more sensible and reliable option that fitting an entire whole g-wagen drivetrain to a RR.

The engines in the older G's weren't much to write home about.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 27
Joined: Fri Mar 04, 2005 6:46 pm
Location: UK

Post by Lao Tsu »

The 2.8 naturally asthmatic 6 cylinder is okay for day to day use

The 3.0 NA 6 cyl is not too bad at all

The 3.0ltr Turbo is superb

The 2.3 pet is an abomination in the eyes of god

The 2.8 and 3.0 ltr pets are okay

The 4.4 V8 likes to run too hot

The 6.0ltr AMG is a mere 500bhp of stupidity

Luckily most of the car engines are an easy swap

Bets of the lot is the newish 5 cylinder 2.7 ltr Tdi - lovely and very fuel efficient - but a bastard to get hold of.
No-body knows everything, the fun is trying to...
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests