Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

'91 hilux gearbox

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 9
Joined: Wed Nov 30, 2005 5:34 am
Location: queanbeyan

'91 hilux gearbox

Post by alby »

just replaced clutch,now the gears are hard to select and reverse is impossible when hot. has anybody got any idea's
Top
Posts: 3349
Joined: Tue Nov 23, 2004 10:29 am
Location: Not where you are

Contact:
Contact Gribble

Re: '91 hilux gearbox

Post by Gribble »

alby wrote:just replaced clutch,now the gears are hard to select and reverse is impossible when hot. has anybody got any idea's
Did you bleed the clutch hydraulics? Id start looking around there.
\m/
Top
Posts: 9
Joined: Wed Nov 30, 2005 5:34 am
Location: queanbeyan

Post by alby »

yeh did all that even had the slave resleeved still no change
Top
Posts: 343
Joined: Fri Mar 19, 2004 8:19 pm
Location: Lalalty NSW (or is that VIC?)

Post by HIL01X »

Sounds like the clutch is draging. Did you put it in the right way around? Is the spigot bearing in all the way? Is the input shaft ok, letting the clutch plate slide along it? Some ideas for you.
Allways been a TOYOTA man.
Now I'm old and grumpy as well.
Top
Posts: 9
Joined: Wed Nov 30, 2005 5:34 am
Location: queanbeyan

Post by alby »

will have to check those ideas as it was working ok before i know the clutch plate can only go on one way thanks for the other ideas
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest