Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

what locker is this ?

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 827
Joined: Thu Apr 28, 2005 7:52 pm

what locker is this ?

Post by F'n_Rover »

hi all,

just bought this locker below. Its a bit rusty and the pinion gear is stripped, but was cheeeeep :lol:

I want to find out what make it is - arb , jac mac , maxi.

sorry the pics a bit fuzzi.
You do not have the required permissions to view the files attached to this post.
Ex-Army - SeriesIII -186s - NP435 - Maxi rear - megasquirt coilpack ignition - AM FM radio with 2 X speakers
Top
Posts: 120
Joined: Wed May 04, 2005 9:55 pm
Location: Out dropping a patch! :)

Re: what locker is this ?

Post by LUCIFER »

popeye wrote:hi all,

just bought this locker below. Its a bit rusty and the pinion gear is stripped, but was cheeeeep :lol:

I want to find out what make it is - arb , jac mac , maxi.

sorry the pics a bit fuzzi.


hi.. that is most definatley an ARB air locker. is it a 10 spline? ,good find. :cool:
cheers
WANTED:?? always buying stuff. what have you got? 0400 077 117,
Top
Posts: 827
Joined: Thu Apr 28, 2005 7:52 pm

Post by F'n_Rover »

tanks,
yep - 10 spline but i'm not too fussed. I got this with a stage 1 front axle assembly, but fitted with uj's not cv's. With the pinion gear stripped would I be right in assuming the 10 spline uj shafts are stronger than the 4.7 pinion anyway?

BTW also scored a complete maxi rear sals. The missus spat it and i'm on the couch, But i still cant stop smilling. :lol:
Ex-Army - SeriesIII -186s - NP435 - Maxi rear - megasquirt coilpack ignition - AM FM radio with 2 X speakers
Top
Posts: 120
Joined: Wed May 04, 2005 9:55 pm
Location: Out dropping a patch! :)

Post by LUCIFER »

popeye wrote:tanks,
yep - 10 spline but i'm not too fussed. I got this with a stage 1 front axle assembly, but fitted with uj's not cv's. With the pinion gear stripped would I be right in assuming the 10 spline uj shafts are stronger than the 4.7 pinion anyway?

BTW also scored a complete maxi rear sals. The missus spat it and i'm on the couch, But i still cant stop smilling. :lol:
you've done well. it comes down to driving style.everything has limitations so do what you reckon will suit your style of driving. cheers
WANTED:?? always buying stuff. what have you got? 0400 077 117,
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

i'm pretty sure ARB sells the sun gears seperate if you want to convert it to 24 spline aswell.
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

popeye wrote:tanks,
yep - 10 spline but i'm not too fussed. I got this with a stage 1 front axle assembly, but fitted with uj's not cv's. With the pinion gear stripped would I be right in assuming the 10 spline uj shafts are stronger than the 4.7 pinion anyway?

BTW also scored a complete maxi rear sals. The missus spat it and i'm on the couch, But i still cant stop smilling. :lol:
I can't see the pic.

If the diff is setup properly, the r&p should be stronger than 10 spline axles. If the gear tooth alignment was out, for whatever reason, they will be more likely to fail.
John
Top
Posts: 168
Joined: Sat Aug 27, 2005 10:28 am

Post by mangie »

I was told by ARB that you can't buy the sun gears, however, Jack Mac will reforge your 10 splines to 24 and give you his axels for around $800.

That's what I'm doing.
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Bush65 wrote:
popeye wrote:tanks,
yep - 10 spline but i'm not too fussed. I got this with a stage 1 front axle assembly, but fitted with uj's not cv's. With the pinion gear stripped would I be right in assuming the 10 spline uj shafts are stronger than the 4.7 pinion anyway?

BTW also scored a complete maxi rear sals. The missus spat it and i'm on the couch, But i still cant stop smilling. :lol:
I can't see the pic.

If the diff is setup properly, the r&p should be stronger than 10 spline axles. If the gear tooth alignment was out, for whatever reason, they will be more likely to fail.
Depends which R&P you are running and how you drive. I have seen many 4.7 R&P's break leaving perfect 10 spline axles.

If it was really fitted t a stage 1 it should have 3.54's though.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Thanks Ben, I missed the part about 4.7 r&p.
John
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 1 guest