Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

My MQ Wobbles!!

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 57
Joined: Mon Jun 06, 2005 12:04 pm
Location: Blue Mountains NSW

My MQ Wobbles!!

Post by ThirstyMQ »

Howdy all,

I don't know if this is a common problem or not but at the 75-80km/h mark, i get a violent wobble in the front end. It sounds like the steering damper is taking a good hammering.

The only way I've found to fix this, while driving, is to either floor it and get above 80km/h (which isn't compatable with my current license points situation in some areas) or slow to about 60-65km/h.

I thought I'd fixed the problem when I replaced the front wheel bearings and saw the state of the old ones (that almost literally fell apart in my hands, no grease!) but unfortunatlty it didn't work.

It only used to do it every now and then and when it's in that speed range, it seems to be started by a bump in the road. But nowadays it's almost a sure thing.

Could the damper be the issue? If so how can I check it. Or is it a balance thing or steering thing??

Any help or suggestions would be greatly appreciated as I now have to change the seat covers coz the missus took it for a drive!

Cheers,
Lewie

FYI it has 164K kms, OME suspension and 31in tyres in good nick.
Yeah..... Nuthin!

84' SWB MQ Nissan Patrol
Posts: 2056
Joined: Tue Mar 23, 2004 6:17 pm
Location: Melbourne

Post by Big Red Toy »

the bushes in the front sheckles where they attach to chassis ;) common problem but easy fix :D
if you can't do it yourself i recommend a pedders store as they have all the parts
Style Side Maverick Ute
4.2 Turbo Diesel
35" Simex
4" Procomp suspension
2" Bodylift
Fibreglass Stuff....
Now highmount & Plasma :d
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

I had the the same problem with mine. I replaced the front spring bushes. Also i noticed a crack in the weld were the spring perch is fixed to the chassis, i welded that and had no problem arter that.
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

ONE OF 3 THINGS TO TRY.

1. check to make sure your U bolts are tight both front and rear. if not tighten them

2. There is a steering stabalizer bolted to your front chassis crossmember, all the relay rods run into this on your steering and then over to the tie rod.
There is a grease nipple on this. GREASE THIS

3. check how worn your bushes are on your front spring hangers and replace if needed, or just grease up depending on how bad they are, also check for chassis cracks on those front spring hangers.

check all these things, buy a tube of grease and go over the whole car and you will find more than likely your problem will be solved.

IF the problem still persists, your tie rod ends or steering bal joints are shagged, so may be tought to replace, but only after trying all else.

Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Posts: 1960
Joined: Mon Apr 18, 2005 9:17 pm
Location: Newcastle

Post by MjWatt »

I got the same problem, the guy I brought it off reckons it only happened since he put new tyres on it, but I think i'll check those things now.
thanks guys
DIRTY ROCK STAR wrote: get an alarm and a case for yoru neighbour.
oh and a spellcheck for you.
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

mq

Post by DR Frankenstine »

Two more things
1. swivell hub bearings for tightness and
2. wheel ballance
Remember some days your the pigeon and other days your the statue
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Screwy_ScrewBall wrote: 2. There is a steering stabalizer bolted to your front chassis crossmember, all the relay rods run into this on your steering and then over to the tie rod.
There is a grease nipple on this. GREASE THIS
Grease is a waste of time if its worn....

better off fitting new bushes ( $16.80 last set I fitted )
USE THE NEOPRANE UNITS ........ NOT THE RUBBER ONES :bad-words:

to check......
Get someone to move the steering wheel in a similar manor to the "shimmy" you are describing, while you look for movement in the front end steering joints.

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Posts: 2
Joined: Sun Nov 27, 2005 8:04 pm
Location: brisbane

Post by leeboy »

Hi i have a MQ lwb just started the same thing. I just droped the tyre pressures down to 30 psi and the shake has gone away. I have new shackles and springs bushes ect but not shore about steering joints. i'll check the rest in morning and let u know.....
Posts: 232
Joined: Mon Mar 01, 2004 3:42 pm
Location: {Sydney}

Post by greenfourby »

What size tyres are you running? Bigger Tyres = Less Caster

Also check the toe in/out, I found on my old 40 that the wobbles got worse after a factory alignment. I gave it a bit more toe in and problem solved, totally !!
[url]http://www.my4x4.com.au[/url]
Posts: 57
Joined: Mon Jun 06, 2005 12:04 pm
Location: Blue Mountains NSW

Post by ThirstyMQ »

Thanks to all those who replied to my deliema.

I tried everything (by that, I mean the ones that cost me no $$) that the kind people who replied suggested but in the end I removed 1 of the adjustment shims from the top and bottom bearings in the steering knuckle flange.

The bearings still looked like they were in good nick and it sorted out the problem so I think I'll leave it at that. Unless I've done something really bad! Gurus?.............

Cheers
Lewie
Yeah..... Nuthin!

84' SWB MQ Nissan Patrol
Post Reply

Who is online

Users browsing this forum: No registered users and 50 guests