Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Are JT'2 Legal?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 101
Joined: Thu Apr 21, 2005 6:38 pm
Location: Wodonga

Are JT'2 Legal?

Post by Kruza »

I want some and insurace company said they dont care what size or type of tyre i get as long as its legal.

I just want to know if they are legal?

Going on a 2" Lifted 105series(Beam Front end)
Posts: 101
Joined: Thu Apr 21, 2005 6:38 pm
Location: Wodonga

Post by Kruza »

And do these tyres need tubes? or are they tubeless?
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Post by marin »

tubeless, but i run tubes in the front due to popping beads at under 20psi.

marin
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

The size of tyre also affects whether or not the tyre is "legal" A 265/75-16 JT2 is almost certainly legal for your Cruiser.

A 34" JT2 will almost certainly require engineering approval to be "legal."

This is a common question here. I suggest you peruse the various bibles for tyre info.

Cheers,

Scott
Posts: 3288
Joined: Sun Feb 02, 2003 10:15 pm
Location: Central West NSW

Post by Slunnie »

AS far as my engineer was concerned.... they were speed and load rated, and he specified the JT2 onto my engineering cert specifically. AFAIK the 35" and under Simexs are all legal. I dont know either way about the 36 though.
Cheers
Slunnie

Discovery TD5, Landy IIa V8 ute.
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Post by De-lux »

my guess is no because they are bias ply.
indubitably
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Post by Roctoy »

how about asking an engineer who can then sign off on the tyres, then the responsibility is on them not you. :D
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Posts: 262
Joined: Mon Sep 20, 2004 2:13 pm

Post by evil_hitman »

they may not be legal on size but as far as for road use they are.
This exact question was asked in an e-mail group i'm in some time ago and as i had JT2's i emailed Chris Hummer at simex. Below is his response.

Matt
The Jungle Trekker 2 tyres, do meet ADR compliance. Therefore, are a legal
fitment. The only problem will occur when your diameter is increased over
the Vicroads roadworthy limits. or you fit any brand of tyre with a lower
load rating. Jungle trekker 2 has some of the highest load ratings around
and easily fits most vehicles.

All simex Jungle Trekker 2 and Extreme trekker tyres have load/speed ratings
which are required for Australian compliance and fitment to your vehicle.
"E" markings are also included to comply in Europe . Some tyres have a DOT
compliance which only relates to the USA.

regards,

Chris
Dynamic 4x4
Simex and General 4x4 Tyres
2/1644 Ferntree Gully Rd
Scoresby, VIC 3179
www.simex4x4.com
2000 GU ST Patrol 4.2 turbo oiler not so bog stock anymore
"EVILGU"
Posts: 101
Joined: Thu Apr 21, 2005 6:38 pm
Location: Wodonga

Post by Kruza »

Thanks guys for the help.

Ill give an engineer a call and see what he says.

And yes i was hoping to get them in 34".
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests