Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

*) jumping outo of low range

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 14
Joined: Wed Jul 27, 2005 1:15 am
Location: Victoria

*) jumping outo of low range

Post by Travo »

My 80 series is jumping out of low rage going down hill I'm not sure weather it is not engaged properly in the first place. It on does it going down hill under compression, pretty scarey and not cool, does anyone have any ideas?
Regards Travo
80 series Turbo Cruiser twin lockers.
Posts: 50
Joined: Wed Apr 20, 2005 9:24 pm

Post by simo toyo »

my fj40 does exactly the same thing. under power too.
fj 40, 82 model factory ps..... oohh yeh, 350 chev. lots more to do. getting there, getting there....
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

Have you changed the oil lately as water does this i found
Posts: 407
Joined: Wed Aug 20, 2003 10:02 am
Location: Hornsby Sydney

Post by Surfin Alec »

Uesd to do it my old 55. I had a short ocky strap from a heater hose that I looped over the 4x4 stick to hold it in place in low range.

Dodgy I hear you say, yep, but for $5 and it works, who cares.

Alec
GO the 80...The mods have started :-)
Posts: 1083
Joined: Tue Apr 26, 2005 12:08 pm
Location: Toowoomba

Post by Guy From Nowhere »

My 60 also has this symptom and I have been advised that for the hassle of ripping it all out and changing things completely to fix it up that I should just hold it in. If you drive up a hill/down and it is under load without the stick being manually held in it spits right? So, what I suggest is either the dodgy ocky strap or (as I am currently working on) a metal flip round base that has one of those clamps. To understand what I mean look at a vehicle mounted fire extinguiser, those are the metal clip i am talking about.

Cheers
SANGA
[quote="MissForbyNooB"] I've played with you AND your missus. [/quote]
Posts: 50
Joined: Wed Apr 20, 2005 9:24 pm

Post by simo toyo »

so it's obviously a design floor from toyota???!!!
fj 40, 82 model factory ps..... oohh yeh, 350 chev. lots more to do. getting there, getting there....
Posts: 619
Joined: Thu Nov 03, 2005 11:20 am
Location: vic

Post by Hamo »

simo toyo wrote:so it's obviously a design floor from toyota???!!!
No it means your gearbox/transfer case need a rebuild
but do as above if you carn't aford it yet ;) ;)
Posts: 588
Joined: Wed Mar 09, 2005 7:04 pm

Post by gotoy »

My 1st gear sometimes jumps out, especially going down hills. For now I just keep my left hand on it to make sure it stays in.
Posts: 14
Joined: Wed Jul 27, 2005 1:15 am
Location: Victoria

Post by Travo »

I think maybe it might be the shifter, because it is hard to pull up to go into low. Bloody 80 series straight shift bullshit I liked the "U" shift pattern better in my 75 and 47 series. I will have stop workin on the motorhome and pull it apart over Xmas, thanks for the sugestions anyway guys.
Regards Travo.
80 series Turbo Cruiser twin lockers.
Posts: 94
Joined: Wed Feb 16, 2005 12:44 pm
Location: Bacon Valley

me tooo

Post by zook chick »

my suzuki sierra also does this. Its a pain in the ass having to hold it in while it is under load. I dont really know what is wrong with it but I am just changing mine over. Would like to know what the problem is if you find out tho.

Just a small bit of advise......

Dont park it on a hill in low range.......

I did when i didnt know that there was a problem with it & she took off down the hill on her own

cheers
cash purchase $1000, 1st crash $800, 2nd crash $1500, ruining a zook in 6 months PRICELESS
Posts: 952
Joined: Mon Oct 21, 2002 8:49 am
Location: KILL - SCYTH

Post by 80diesel4play »

My 80 had the downhill symptoms for a while now - thought it was the engine mount flexing and knocking it out - now I can't use low range at all - even on the flat - the gears have died!

Off to be pulled down over xmas and $$$ spent on gearing! Yay! not!

Try adding moreys and check it's locking in fully on selection!
80 Series Turbo - the Toy car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
Posts: 11
Joined: Tue Mar 23, 2004 5:02 pm
Location: Seven Hills

Post by revrev »

had it happen all the time in my troopy. Had to drive with one foot on the low range gear stick. Apparently it is common in 75s. my 60 hasnt done it yet thpugh. Bloody scary when it did go on big down hills.
Big red all the way
Posts: 11
Joined: Tue Mar 23, 2004 5:02 pm
Location: Seven Hills

Post by revrev »

had it happen all the time in my troopy. Had to drive with one foot on the low range gear stick. Apparently it is common in 75s. my 60 hasnt done it yet thpugh. Bloody scary when it did go on big down hills.
Big red all the way
Posts: 438
Joined: Thu Jun 24, 2004 4:58 pm
Location: wollongong

Post by Stackson45 »

When that happens try adjusting the shift mechanism screw adjuster - as when you shift across into low 4 (40 and 70 series ) the lever usually comes to rest on the metal stop (which guides the lever through H2, H4 and L4). You can also mod the guide so that you have L2.

If that adjuster doesn't work then you'll have to go deeper - or strap it in place.
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Post Reply

Who is online

Users browsing this forum: No registered users and 61 guests