Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4.6 Diff Gears for GU
4.6 Diff Gears for GU
Does anyone want to swap a GQ front or rear 4.6 diff gear for a large GU rear 4.6???
Australian 4WD Specialist
www.aus4wdracing.com.au/forum
www.aus4wdracing.com.au/forum
a question on diff gears,
from what ive heard, you can get, 4.11, 4.3, 4,6 and 4,8's am i correct oon these?
if so, i take it 4,11's run 31's
4,3's run 33's
4,6's run 35's
and 4,8's run bout 37's
is that about correct to put the speedo back into callibration? and not harm my economy? if so what model do i get the 4,3's out of?
Shawn
from what ive heard, you can get, 4.11, 4.3, 4,6 and 4,8's am i correct oon these?
if so, i take it 4,11's run 31's
4,3's run 33's
4,6's run 35's
and 4,8's run bout 37's
is that about correct to put the speedo back into callibration? and not harm my economy? if so what model do i get the 4,3's out of?
Shawn
presuming your running 33's, first check your speed with a gps, mine was spot on with 4.11 gears.
you can also get 3.900 and 3.545 but the only 4.3's i can think of that will fit your h233b rear diff would be out of the 3.0litre petrol patrol.
you can also get 3.900 and 3.545 but the only 4.3's i can think of that will fit your h233b rear diff would be out of the 3.0litre petrol patrol.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
event pics http://bigred.redbubble.com/
Grungle wrote:The 4.88 gears I got from GJ Gears said GQ on the box. When I rang they said the diffs are the same (except for the 4.8 and I think some 3.0).
Regards
David
The H260 rear diff is in GU Petrols & Manual 3.0 TD however it has been said that some variations have occurred at the factory.
You can check by the compliance plate. There is a transaxle code, it has HG 41 for a 4.1 ratio with H233B rear. HH 41 is for a 4.1 ratio with H260 rear diff.
-----
Ian
GU 4500 Petrol, 35s, Gearmaster, front lawns and fire trails only....
Ian
GU 4500 Petrol, 35s, Gearmaster, front lawns and fire trails only....
patrol 4.625 diff has teeth 37/8.
navara 4.636 diff has teeth 51/11.
bolt holes the same but can't say for sure whether or not they were drilled out by diff shop when they installed it.
navara 4.636 diff has teeth 51/11.
bolt holes the same but can't say for sure whether or not they were drilled out by diff shop when they installed it.
[url=http://bigred.redbubble.com/][color=red][b]You can follow me but its gunna hurt ![/b][/color][/url]
event pics http://bigred.redbubble.com/
event pics http://bigred.redbubble.com/
a question on diff gears,
from what ive heard, you can get, 4.11, 4.3, 4,6 and 4,8's am i correct oon these?
if so, i take it 4,11's run 31's
4,3's run 33's
4,6's run 35's
and 4,8's run bout 37's
Hi guys,
Just to let you know that there is a 5.1 ratio that finnaly I manage to buy...it comes from Spanish Army Nissans...fits GQ.
Front: I have to chnage the satelites and to make a new courved tie-rod.
Back: fiting the ring and pinion.
Consequentely, I sell my 4,625 gears for GQ.
Regards, Gabriel
from what ive heard, you can get, 4.11, 4.3, 4,6 and 4,8's am i correct oon these?
if so, i take it 4,11's run 31's
4,3's run 33's
4,6's run 35's
and 4,8's run bout 37's
Hi guys,
Just to let you know that there is a 5.1 ratio that finnaly I manage to buy...it comes from Spanish Army Nissans...fits GQ.
Front: I have to chnage the satelites and to make a new courved tie-rod.
Back: fiting the ring and pinion.
Consequentely, I sell my 4,625 gears for GQ.
Regards, Gabriel
GQ MWB 105 ", DID Mitsubishi engine with big turbo, fiber glass body, Boogger 38.5/11/16, 2x8274, 5 link front, triangulated 4-link rear, SAW 14" and 16" coil-overs, , 5.1 r&p.
5'7s
Hi all,
I am expecting some 5'7 ratios soon to suit the Nissan GQ/GU centers but may or may not run them when they turn up due to weakness of the gear set, as I run 42" swampers. Any way there are other ratios availble made by a company in italy for the nissan GQs and GU's people should look into it as people are getting ripped off majorly here in australia
so do your home work before spending three times the amount on a set of Australian made gears 
I am expecting some 5'7 ratios soon to suit the Nissan GQ/GU centers but may or may not run them when they turn up due to weakness of the gear set, as I run 42" swampers. Any way there are other ratios availble made by a company in italy for the nissan GQs and GU's people should look into it as people are getting ripped off majorly here in australia
so do your home work before spending three times the amount on a set of Australian made gears 
Grungle wrote:How much do genuine Nissan 4.625 gears from a 2.8 GU go for secondhand?
The last set that I priced from a wrecker in Sydney was $1000 each... hes dreamin.
Gabriel wrote:5.1 ratio that finnaly I manage to buy...it comes from Spanish Army Nissans...
Gab, do you know if these are OEM parts or aftermarkets like G&J?
Rgds,
Tim
CRUSHU wrote:do you reacon a guy who lives in romania will know who g&j are??? maybe they come from a supplier in europe, but its unlikely they are from australia!!
he does actually! He deals with people like Marks adapters!!!
they are genuine 4.6s I was talking to him about them...
He has access to more than 1 set too they are 'common'.. Since lots go for the 5.x's.. :(
Who is online
Users browsing this forum: No registered users and 0 guests