found this on ebay, wonder if this is any good.
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... %3AIT&rd=1
Didn't all feroza have the same motor?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Genie headers (extractors) on ebay
Moderator: Tiny
Here are some pictures of the MRT Performance and Genie Header systems.
http://www.warfs.org/content/view/43/63/
http://www.warfs.org/content/view/43/63/
-jonathan
slc, ut, usa
www.warfs.org
1992 Daihatsu Rocky
slc, ut, usa
www.warfs.org
1992 Daihatsu Rocky
I bought my extractors from that chap. Couldn't be happier!!
Very good person to deal with. Sent them o/seas with no hassels and quick service.
To clarify the situation, these are a direct bolt on, but the Euro specs may be different from Aussie spec. My Fez had the original exhaust on it, which suprisingly did not have a CAT.
But realistically, if your buying a set of extractors, why not just do the rest of the exhaust as well?
Very good person to deal with. Sent them o/seas with no hassels and quick service.
To clarify the situation, these are a direct bolt on, but the Euro specs may be different from Aussie spec. My Fez had the original exhaust on it, which suprisingly did not have a CAT.
But realistically, if your buying a set of extractors, why not just do the rest of the exhaust as well?
bsically there are 2 ways main ways of bening pipe one is centre line bending which is where there is dies on the out side that bend the pipe basically one lot of dies bending the pipe around anotherMudRoza wrote:another question.. what's mandrel bent?? i know what a flex joint looks like but mandre bent?? not sure what it really looks like or what it really do?
the proble with this is if the pipe is soft enough etc it can start to crush or dent when its bend around one die.
mandrel bends refer to the machine used being a mandrel bender
which works in a similiar way to the above mentioned bender
but it has a flexible die on the inside that goes in the pipe and prevent the pipe from crushing in when bent around the one of the die's
thats how i understand it well from my observation
we have a centreline and mandrel bender at our work
on disadvantage of a mandrel bender is you cant bend as thick a side all tube
but in exaust systems it doesnt matter because the pipe wall isnt thick enough to worry
i will draw a little diagram to show the diffrent between the 2
You do not have the required permissions to view the files attached to this post.
Mandrel bends = $$$$ ; highly unlikely you'd notice any difference in power IMHO providing they've done a good job on the bends.
BTW there are good and bad "crush" bends too. Some you'll have trouble telling from a mandrel bend, others look really restrictive. I've got Hurricane extractors that have the "crush" bends and they don't look too bad.
BTW there are good and bad "crush" bends too. Some you'll have trouble telling from a mandrel bend, others look really restrictive. I've got Hurricane extractors that have the "crush" bends and they don't look too bad.
David
Who is online
Users browsing this forum: No registered users and 0 guests