Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

info on broken bundy

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

info on broken bundy

Post by evanstaniland »

my bundera just snapped a timing chain and its gona cos over a grand to get it fixed i need some help regarding a engin upgrade

does anyone know how easy it is 2 put a commador V6 into it i herd it is easy with an adaptor kit for the box can anyone give me more of an insite to it as i need to do it soon

cheers
evan
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

should be easy enough, if that fails my mate has a unreg bundy he might be willin to part, as the rust finally got the better of it
www.overkill4x4.com
ph 94766137
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

I did the timing belt (diesel) in mine and destroyed the motor.

I did the v6 option but retained the manual (stronger box). Took a while for me to do due to $$$$ (student) and doing mostly myself. Also did lots of other things while I was going. But that didnt worry me as it is 2nd vehicle.

You should be impressed with the new found power if you do go this way.

Cheers.
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Post by evanstaniland »

I.M.P.O.S.E did it just bolt in then you used an adaptor kit to get it goin or wat cos i wont be doin it myself i need all the info so i can tell the person who is doin it wat teh hell to do. i plan to keep it manual with the box in a RJ70 hold up with the increase in power or will i start ripping gears n shit like that.

cheers
Evan
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

evanstaniland wrote:I.M.P.O.S.E did it just bolt in then you used an adaptor kit to get it goin or wat cos i wont be doin it myself i need all the info so i can tell the person who is doin it wat teh hell to do. i plan to keep it manual with the box in a RJ70 hold up with the increase in power or will i start ripping gears n shit like that.

cheers
Evan
I used a Marks adaptor for the bellhousing to motor adaptor, plus their engine mounts and a sump (could make these yourself if you had equipment I guess)

Bolts in easy enough (im not a mechanic and I did ok with a little help from the right people) I then had a mate wire it up so that I could get it started and running to sort everything out and give it a tidy up. So it sounds likes you have a mechanic going to do it for you then they shouldnt have any dramas with it.

The commodore wiring was 'spliced' in where need and the rest was filed out in the 'big green filing cabinet'. Some things are a little dodgy, but over all it is still going well. It is getting a few kays behind it now.

Had no problems getting it engineered. The kit stuff helped here.

As for the gearbox I am unsure... If mine had been petrol I probably would have gone auto, but gears are to much fun I reckon. Others might have some information in regards to the strength of that gearbox.

Also, if using an auto, your adaptor to transfer is cheaper then the bellhousing one, you wont need a different clutch set-up, which require different starter motors and also flywheels. There is over $1000 in that alone.
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Post by evanstaniland »

does anyone know if it would be possible to put a 1JZ-GTE a 1992 twin turbo soarer engine with out doing any major work or spending big money on it??

Evan
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

Been done. Search for it on here.
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Post by evanstaniland »

would a turbo diesel from a 78 or 75 series bolt into a bundera as they are pretty damn the same
Posts: 4825
Joined: Sun May 04, 2003 6:33 pm
Location: Berwick vic

Post by droopypete »

evanstaniland wrote:would a turbo diesel from a 78 or 75 series bolt into a bundera as they are pretty damn the same


Same steering wheel, that is about it :)
A bundy has a shorter nose than a 75/78 (4cyl v 6cyl),
different gearbox,
smaller diff,
are you getting the idea?
you can do anything you want if you have the resorces ($$$/time/skill),
there are plenty of threads here about diferent conversions have a look around.
Peter.
Posts: 86
Joined: Sun Nov 23, 2003 7:21 pm
Location: melbourne

chev

Post by Gibonator »

cruiser gearbox, 350 chev and 60 series diffs is the way to go
FJ 73, army green ,snorkel, high mount, dual bats,draws,
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Post by Ice »

you could possibly put your bundy body onto say a rusty swb 70's chassis and running gear :)
xxxx wrote:
:bad-words: :snipersmile:
Posts: 46
Joined: Sat Feb 05, 2005 12:15 pm
Location: Sydney

Post by Rock Wallaby »

evan,

I asked the question a while ago and got a good response have a search for it there is some good info in there, a few people on here have done jap import conversions (1ggte etc....) ask skip i think he has done a 1 JZ conversion on his bundy, if your not going to do the conversion yourself be prepared to start forking out its not cheap, thats why I bought a wrangler instead ;)
You are your own worst enemy!
Post Reply

Who is online

Users browsing this forum: No registered users and 61 guests