Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

NEW PROJECT.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

NEW PROJECT.

Post by OVERKILL ENG »

After taking the rover out on the weekend and braking both diffs climbing pebbles I have decided to piss it off and build a long wheelbase Zook.If anyone knows of a cheap long wheel base ZOOK that is rego'd and close to standard let me know. :D :D
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

There a bit under developed around there , what did you actually break sam.?
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Larry it broke the drivers side axle/cv and bits of the rear ring gear came out through the rear housing.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

cool so u gunna keep this one registered? :D :D
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Yes this one will be registered and full bodied well sortof.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 9393
Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane

Post by antt »

can't wait to see this thing :D
Top
Posts: 1781
Joined: Fri Jan 17, 2003 6:44 pm
Location: Central Coast NSW

Post by Midget »

Sam
So how long after you buy a long wheel base will it be attacked by the 9" angle grinder.
My guess is not long.
What plans do you have for this one???

Jamie
Team 4x4 Specialist 005
Proudly Sponsorsed By
WWW.MAXXIS.COM
WWW.STAUNPRODUCTS.COM
COUNTRY WIDE MECHANICAL
Thanks to
WWW.OPW.COM.AU
WWW.DOBBINENGINEERING.COM
Top
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Contact:
Contact Maggot4x4

Post by Maggot4x4 »

Fourwheelin wrote:Sam
So how long after you buy a long wheel base will it be attacked by the 9" angle grinder.
My guess is not long.
What plans do you have for this one???

Jamie


I can't believe he hasn't taken the 9" grinder to his new 100. :P :P :finger: :finger: :finger:
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Top
Posts: 162
Joined: Mon Apr 14, 2003 12:23 am
Location: Canberra

Post by suzidisco »

What are you looking for in a cheap LWB suki as i am selling mine soon to pay for the maxi axles and 110 cvs.
were you running 110 cv or standards cv
Top
Posts: 3825
Joined: Wed Nov 06, 2002 8:42 pm
Location: in the sky , its a bird , its a plane ! No its super MOOSE !!!

Post by moose »

give Joe a ring at
4PLAY OFFROAD
he still has 1 for sale !!!!

03 97614694
MissForbyNoob wrote:
and one day i'll just become a worthless housewife.
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

suzidisco wrote:What are you looking for in a cheap LWB suki as i am selling mine soon to pay for the maxi axles and 110 cvs.
were you running 110 cv or standards cv


I'll be honest as cheap as possible Am looking at about $2000.
The closer to standard the better.

I was running all standard shit in the Rangie so I knew it was going to break but I didn't expect them to break that easy.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

what are the plans for it???? :D
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 2296
Joined: Thu Oct 24, 2002 4:30 pm
Contact:
Contact OVERKILL ENG

Post by OVERKILL ENG »

Fourwheelin wrote:Sam
So how long after you buy a long wheel base will it be attacked by the 9" angle grinder.
My guess is not long.
What plans do you have for this one???

Jamie


This one will be my daily driver that I can drive anywhere to go 4 wheeling.
Specs:
Bobbed tray and canopy.
spring over high steer
35 mtr
1.3 injected and turboed.
Series 1 gearing.
tube front bar
tube rear bar.
Trailtough flares.
I want to use in a few winch events as well so it will have a high mount.
Diffs I am undecided yet maybe the same as the buggy if not heavily braced widetrack diffs.
SAM
OVERKILL ENGINEERING
www.overkill4x4.com
Top
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

ouchyyy, 400ft/lb xthe thingo multiply be tha watso minus 15% Just for the sake of it ,= carnage :?
Posted: Mon Jun 30, 2003 3:58 pm

--------------------------------------------------------------------------------

Larry it broke the drivers side axle/cv and bits of the rear ring gear came out through the rear housing.
SAM


Bummer sam.
Top
Posts: 1781
Joined: Fri Jan 17, 2003 6:44 pm
Location: Central Coast NSW

Post by Midget »

overkill wrote:
Fourwheelin wrote:Sam
So how long after you buy a long wheel base will it be attacked by the 9" angle grinder.
My guess is not long.
What plans do you have for this one???

Jamie


This one will be my daily driver that I can drive anywhere to go 4 wheeling.
Specs:
Bobbed tray and canopy.
spring over high steer
35 mtr
1.3 injected and turboed.
Series 1 gearing.
tube front bar
tube rear bar.
Trailtough flares.
I want to use in a few winch events as well so it will have a high mount.
Diffs I am undecided yet maybe the same as the buggy if not heavily braced widetrack diffs.
SAM


Sam
Sounds like it will be a very fun daily driver.
How much boost will you run?????

Jamie
Team 4x4 Specialist 005
Proudly Sponsorsed By
WWW.MAXXIS.COM
WWW.STAUNPRODUCTS.COM
COUNTRY WIDE MECHANICAL
Thanks to
WWW.OPW.COM.AU
WWW.DOBBINENGINEERING.COM
Top
Posts: 638
Joined: Mon Nov 04, 2002 7:52 am
Location: A little north of sydney

Post by dave »

If i get my way he run lots.
If were going to do winch challanges its got to somke those 35's.
Top
Posts: 6411
Joined: Tue May 27, 2003 11:49 pm
Location: Brisbane Australia

Contact:
Contact Beastmavster

Re: NEW PROJECT.

Post by Beastmavster »

overkill wrote:After taking the rover out on the weekend and braking both diffs climbing pebbles I have decided to piss it off and build a long wheelbase Zook.If anyone knows of a cheap long wheel base ZOOK that is rego'd and close to standard let me know. :D :D


Cmon build a long wheelbase Vitara with ute conversion, twin transfer cases, SAS swap and 38" rubber you know you want to.
Top
Posts: 15549
Joined: Tue Oct 22, 2002 9:23 am
Location: Your Mummas House!

Contact:
Contact bj on roids

Post by bj on roids »

so you wanna sell the rover? how much? wanna be dirt cheap with two busted diffs in it.
hands and mums dont count!!!
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 12 guests