Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Question: Toyota engines(v6) for Hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
CC
Posts: 48
Joined: Mon Jan 10, 2005 5:15 pm
Location: Redland Bay, Brisbane, QLD

Question: Toyota engines(v6) for Hilux

Post by CC »

I was curious about what sort of toyota engines were easy fit on hilux. Basically engines from Supras, crown, soarers and so on. I've heard a few conversions using those sort of engines and I wanted to know if they were worth the conversion and your opinion on them.

Thank you

CC
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

for a start the supra crown and cressida all have strait 6 not v6 but you can get more info from http://www.4wd.net.nz/suprasurf.htm this is the place you need to go to find out about info on using these motors
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Posts: 45
Joined: Fri Nov 04, 2005 9:08 pm

Re: Question: Toyota engines(v6) for Hilux

Post by andrewfarmer »

CC wrote:I was curious about what sort of toyota engines were easy fit on hilux. Basically engines from Supras, crown, soarers and so on. I've heard a few conversions using those sort of engines and I wanted to know if they were worth the conversion and your opinion on them.

Thank you

CC
Lexus/Camry V6 - but they're not a good motor to use.

Bite the bullet and put in a 3.8 commodorre (pref with supercharger)
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Post by TWISTY »

Just as fuel efficient as a commodore V6, but sh!tloads better....Lexus V8...full conversion cost me just over $6000......
You do not have the required permissions to view the files attached to this post.
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Posts: 108
Joined: Tue Sep 13, 2005 10:19 am
Location: Brisbane, QLD

Post by CheesePony »

That is so hot.
It's not the speed that kills you... it's the sudden stop.
Posts: 3614
Joined: Sat Nov 02, 2002 9:02 am
Location: Gold Coast

Post by 83 lux »

I wouldn't be putting in a como v6
I would be putting in a 3rzfe or a lexus v8
3rz fe cost me about $2500 to install (myself)
i have just over 100hp at the wheels
and its a stright bolt in

100hp is MORE then enough to break EVERY single piece of hilux running gear.

The problem with the como v6 conv. is the over heating issus that you WILL have if you do it. The only upside is that you end up with an auto.

Scotty
HOOLAY Wish i could buy boggers for my DH bike
Posts: 826
Joined: Sat Mar 13, 2004 4:18 pm
Location: Northern NSW

Post by slosh »

83 lux wrote:
100hp is MORE then enough to break EVERY single piece of hilux running gear.

Scotty
Seem to read about this a lot with the lux- the running gear will eventually break with any power upgrade.

Sounds like the 3rz is the cheapest way. Any other bigger donk will probably require a stronger gearbox to make it last.

Commo v6 and auto isn't a bad choice if you can get the conversion bits cheap. From what I've read tho you will need to throw a few $$$ at the auto to make it reliable.
Posts: 1055
Joined: Sun Nov 16, 2003 3:46 pm
Location: Inala Ponds

Post by basketcase »

slosh wrote:
83 lux wrote:
100hp is MORE then enough to break EVERY single piece of hilux running gear.

Scotty
Seem to read about this a lot with the lux- the running gear will eventually break with any power upgrade.

Sounds like the 3rz is the cheapest way. Any other bigger donk will probably require a stronger gearbox to make it last.

Commo v6 and auto isn't a bad choice if you can get the conversion bits cheap. From what I've read tho you will need to throw a few $$$ at the auto to make it reliable.
I have been told by people like Mike at Superior to do it right with stage 3 shift kit, getting speed sensors and all the shit to do it right it would cost around $6000 to do it your self and getting up around $10000 for it installed.

3RZFE or 1UZFE lexus V8 are much better options. 3RZFE is the more sensible option. But if you are just after the noise and power to break sh1t on command then go the 1UZFE lexus V8 :twisted:
Posts: 434
Joined: Mon Apr 19, 2004 2:50 pm
Location: Tweed Coast

Post by I.M.P.O.S.E »

83 lux wrote:
The problem with the como v6 conv. is the over heating issus that you WILL have if you do it. The only upside is that you end up with an auto.
Why is it that everyone always says this? I gave mine a flogging the other week out in the bush on a pretty hot day and didnt have any dramas with this.

Yeah it does get hot under the engine bay, but probably no hotter then my commodore.
Posts: 346
Joined: Fri Dec 06, 2002 6:08 am
Location: New Zealand

Post by Julian_4x4 »

hey thats what i can use my 10k savings for :shock:

Conversion very well explained and understandable :)
CC
Posts: 48
Joined: Mon Jan 10, 2005 5:15 pm
Location: Redland Bay, Brisbane, QLD

Post by CC »

What about running auto on those sort of engines? or there will be some mods/adapters for it?
Posts: 3614
Joined: Sat Nov 02, 2002 9:02 am
Location: Gold Coast

Post by 83 lux »

what sort of motors :?:
HOOLAY Wish i could buy boggers for my DH bike
CC
Posts: 48
Joined: Mon Jan 10, 2005 5:15 pm
Location: Redland Bay, Brisbane, QLD

Post by CC »

No idea actually...

Been looking around for engine specs and I know nothing about toyota engines :D
Twisted by Design
Posts: 2607
Joined: Tue Jul 15, 2003 12:52 pm
Location: Sunshine Coast QLD

Post by TWISTY »

Don't know the full details, but the Auto that comes in the Lexus V8 halfcut can be mated to a surf transfer case without too much dramas....(need to swap input shafts over)

I'm sure there was a thread on here somewhere about it....try searching for it maybe....if not I can dig some info up off another forum....
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Posts: 233
Joined: Sat May 14, 2005 4:59 pm
Location: newcastle

Post by mico »

can't a surf auto be used with a 1uz bell housing same box slightly different internals but it already has the t/case on it might be worth looking at....
if it ain't broke send it to me i'll fix it!
Posts: 4990
Joined: Sun Oct 20, 2002 7:22 pm
Location: Qld, Hilux Country

Post by bubs »

I made my own adaptor for a A340E auto to R1FA transfer, Lexus 1UZ Auto to Hilux Gear Driven Transfer
You do not have the required permissions to view the files attached to this post.
http://www.budscustoms.com.au
Like us and follow on facebook for up to date information of what we are working on and great random specials!

Custom Parts & Fabrication!
Ph: 0417 708 598
Posts: 3685
Joined: Sat Sep 27, 2003 8:38 am
Location: Sydney

Post by Roctoy »

bubs wrote:I made my own adaptor for a A340E auto to R1FA transfer, Lexus 1UZ Auto to Hilux Gear Driven Transfer
Nice job Bubs, what did you have to do with the output shaft from the auto?
Outers & Arms up stickers coming soon you hungry bitches!

http://www.myultimate4wd.com
GRIMACE wrote:How I miss the days of care free wheelin with the crews!
Post Reply

Who is online

Users browsing this forum: No registered users and 110 guests