Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

3.5 HARMONIC BALANCER

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

3.5 HARMONIC BALANCER

Post by Loanrangie »

can anyone tell me what size the bolt with the crank handle dog is ie socket size ? I think it was 1 5/16 but i'm not sure and i wil have to buy one the right size.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 141
Joined: Sun Jan 16, 2005 7:22 pm
Location: Gold Coast,Tweed

nut

Post by THE 109 »

you're right on the money,1 5/16" deep socket.a standard socket won't clear the starter dog.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Thanks mate, gonna have to find one today.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Loanrangie wrote:Thanks mate, gonna have to find one today.
How did u go loan? Where did u buy one from? Im looking for this item at the moment!
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Loanrangie wrote:Thanks mate, gonna have to find one today.
How did u go loan? Where did u buy one from? Im looking for this item at the moment!
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Havent got one yet, but Merrigans ? down on para rd should have one.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Havent got one yet, but Merrigans ? down on para rd should have one.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Loanrangie wrote:Havent got one yet, but Merrigans ? down on para rd should have one.
Do u know when they open up again mate?
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Most likely Wednesday i would say. Didnt you get another engine for yours ?
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Loanrangie wrote:Most likely Wednesday i would say. Didnt you get another engine for yours ?
Yeah im in the process of swapping the old timing cover onto the 3.9 so the inlet manifold hoses matches up with the new water pump. Cant get the old timing cover off with out that socket. Its all coming along thou slowly. Will be nice to have some extra poke. :D
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

How did you go steve ? I ended up locktiting and rattle gunning mine back on but i will get the other balancer off the other rangie just it case it lets go again so will need to get a big socket still.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 1006
Joined: Wed Jan 07, 2004 8:25 pm
Location: Strapped into the Evil!

Post by BIg StEvE »

Loanrangie wrote:How did you go steve ? I ended up locktiting and rattle gunning mine back on but i will get the other balancer off the other rangie just it case it lets go again so will need to get a big socket still.
I went out and spent $23 on a socket and gave it to my mate who is doing most of the engine work for me and he said that it didnt quite fit! (thanks guys) Anyway he tells me he got it off and the 3.9 doesnt have a starter dog so were right to use a normal socket on that one. Couple of days and she should be running hopefully for a blast out to Toolangi on the sunday to see how it feels.

Loan i went to Merigans and had no luck but i rang around most total tools and Epping had what i wanted! Although u might wanna check the size yourself!
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 4 guests