Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Can't switch from Sub to Main tank - 2000 100 series Cruiser

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 7
Joined: Thu Dec 29, 2005 6:49 pm
Location: Brisbane

Can't switch from Sub to Main tank - 2000 100 series Cruiser

Post by Cruiser_dude »

Hi All,

I have just purchased a 100 series GXL cruiser and the Sub light is staying on and won't go off. I have tried pressing the sub button with and without the engine running. Has anyone else had this problem or know of a solution?
Thanks.
Posts: 232
Joined: Mon Nov 04, 2002 12:12 am
Location: perth western australia

Post by dinos4x4 »

I had this problem when my sub tank was removed for my LPG tank

I think i disconnected the battery , so it could reset itself

then i pulled the switch out and dissconected the plugs on the back
100series 2002 4.5/LPG
GET YA GEAR OFF ROAD
www.4x4web.com.au/dinos4x4
Posts: 7
Joined: Thu Dec 29, 2005 6:49 pm
Location: Brisbane

Post by Cruiser_dude »

dinos4x4 wrote:I had this problem when my sub tank was removed for my LPG tank

I think i disconnected the battery , so it could reset itself

then i pulled the switch out and dissconected the plugs on the back
Thanks dinos4x4,
I'll try that tomorrow.
Cheers.
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Post by +dj_hansen+ »

Mate has the same problem in his 80 series... when gas tank was fitted, now the sub tank light stays on... i think it can be fixed by searching for the sender wires and joining them... Someone else may have a more scientific approach :D
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 7
Joined: Thu Dec 29, 2005 6:49 pm
Location: Brisbane

Post by Cruiser_dude »

Thanks for the replies guys. I pulled the switch out of the dash and it seems to have been out of place slightly and the dash panel wasn't clipped in properly so it was out of place also. I fixed the dash and put the switch back in and she's all fine now.
Cheers.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest