After looking at ih8mud forum in the states I see that a lot of the 80's over there run the factory lockers. However I the only real complaint I see is cv's breaking but not a lot about busted diffs which i find a bit strange.
Is there any difference in strength between std open diffs (particulary in front) and the factory diffs with the electric lockers?
Thanks in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
80 electric lockers and diifs
Moderators: toaddog, Elmo, DUDELUX
Ive got a Factory TD 80 with factory lockers. I never had a problem with them and have run up to 38" tyres. I dave pulled the lookers out to refresh the bearings and they are very robustly built and have bigger bearing carrier than the std cruiser diff. The only thing i dont like is there a bit slow to activate.
wally
wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Who is online
Users browsing this forum: No registered users and 3 guests