Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

torqueflite oil flow

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 200
Joined: Wed Dec 04, 2002 1:11 am
Location: Perth WA

torqueflite oil flow

Post by discokid »

Hi Guys

Im fitting some one way valves to my oil cooler lines to stop the oil flowing out of the coolers overnight and over filling the box

The over filling is causing oil to come out the breather due to the large volumes in the coolers ( ive got 4)

please note the box isnt over full when running

I need to know which way the oil flows so I can put the valves in the right way.

Ive found two lines.

The first is one close to the top of the box near the kickdown and selector levers.

The second is near the front corner of the sump but is still connected to the case

All I know is that the oil goes out of the torque convertor to get cooled.

Does any one know which one is out to the cooler and which one is back in


Thanks
Top
Posts: 97
Joined: Wed Jan 12, 2005 5:27 am

Re: torqueflite oil flow

Post by ashtrans »

discokid wrote:Hi Guys

Im fitting some one way valves to my oil cooler lines to stop the oil flowing out of the coolers overnight and over filling the box

The over filling is causing oil to come out the breather due to the large volumes in the coolers ( ive got 4)

please note the box isnt over full when running

I need to know which way the oil flows so I can put the valves in the right way.

Ive found two lines.

The first is one close to the top of the box near the kickdown and selector levers.

The second is near the front corner of the sump but is still connected to the case

All I know is that the oil goes out of the torque convertor to get cooled.

Does any one know which one is out to the cooler and which one is back in


Thanks

out at the front, in at the back,
Dave

www.ashcroft-transmissions.co.uk
Top
Posts: 200
Joined: Wed Dec 04, 2002 1:11 am
Location: Perth WA

Post by discokid »

Cheers Ashtrans
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests