what psi is the in tank efi pump and are the 4.5 and 4.8 the same. what $ are they worth 2nd hand. do they flow enough for a v8 swirl tank.
does the sender still work a gq fuel level gauge.
many thanks peoples
bru
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
gu petrol fuel pump pressure
gu petrol fuel pump pressure
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Hey mate,
We had a GQ in a little while ago with a v8 350 ramjet crate motor and it was running a 4.8l pump inside a long range tank. No swirl pot but I am sure that the tank has a little section inside it that acts like one anyway.
I have been told also by long range automotive that the later model pump and sender should fit up and read with the gq dash.
Hope this helps
We had a GQ in a little while ago with a v8 350 ramjet crate motor and it was running a 4.8l pump inside a long range tank. No swirl pot but I am sure that the tank has a little section inside it that acts like one anyway.
I have been told also by long range automotive that the later model pump and sender should fit up and read with the gq dash.
Hope this helps
Thxozy1 wrote:GQ 4.2 Carby as mechanical pump in engine bay,
4.2 EFI as an intank pump
4.2 Diesel as a Mechanical Indector pump mounted off the side of the block,
i believe..........
Just trying to work out what pump(s) I need, will probably be easier if there is no pump in the tank then I can run a lift pump and the main efi pump off the surge tank.
[url]http://www.my4x4.com.au[/url]
Who is online
Users browsing this forum: No registered users and 5 guests