Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ spring info

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 995
Joined: Sun May 01, 2005 2:55 pm
Location: Tamworth

MQ spring info

Post by Turbo Tonka »

hi, me and the old man started a bit of work on his mq 2day. we fitted his front OME dakar 2 inch springs and what a pain in the ass it was. we,ve fitted plenty of springs before but this was just a pain. now the question i have is has anyone fitted these to their own or even another brand and had troubles because on the back end of the spring the military wrap on the spring goes up inside the mount and hits on the chassis just sitting on flat ground. therefor it will hit or bend when flexing. any ideas would be great
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

this has been discussed on here before, ill try and find the link for ya,

found the link for ya,

http://www.outerlimits4x4.com/PHP_Modul ... ry+wrap+mq
Top
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

My mate and I ordered new springs from Westcoast suspension, mine for an MK, his for a MQ, they arrived looking same except for the straps holding them together, mine cleared but close, his did not clear at all, I think he grinded a bit off his to get them to fit, there was no way they were gonna fit.
Hoppy
Top
Posts: 55
Joined: Mon Jan 03, 2005 10:22 pm
Location: Philippines

Post by Mintoy »

Hoppy11 wrote:My mate and I ordered new springs from Westcoast suspension, mine for an MK, his for a MQ, they arrived looking same except for the straps holding them together, mine cleared but close, his did not clear at all, I think he grinded a bit off his to get them to fit, there was no way they were gonna fit.
Hoppy
question? do you mean to say that the springs of the MQ and MK are different? In what way?
Top
Posts: 1109
Joined: Sat Feb 26, 2005 8:46 am
Location: Geraldton West Oz

Post by Hoppy11 »

Well the front ones were different due to the MK having offset shackles, using neoprene bushes instead of a steel sleeve, the rears were the same except for the straps that hold them together, also the rear shackles were 10mm longer on the MQ, making it 10mm higher at the rear.
Hoppy
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

MK sprinngs are the same width and length in total...

its only right up at the mounts..... because the MKs have offset shackles rather than straight ones

when i fitted the IFS lux rear springs in the front of mine, i had trouble getting them in the mounts on the front ( reverse shackle ), shackle end was easy as i made the shackles as well.....

but all i did is grind a nib off the end of the second leave ( the one that was hitting ), had them in months now, heavy offroad and comp use and no dramas with them.

just slice them alittle.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests