I had to re-do slightly my MK frame and I had to move my frame's front cross member, where the idler arm bolts on. Now I'd like to re-do my steering on my MK similar to GQ (no idler arm).
Can I do the following: leave MK stock tie-rod, then have a custom made drag link that will go from the tie-rod to the pitman arm?
MK's pitman arm is kinda short and crooked and I was hoping to get a nice little bit longer with more drop pitman arm (I have 2" front shackles). So I was thinking to replace my pitman arm or should I go for a compete GQ power steerting box or just leave the stock MK's pitman arm?
I did search but I didn't find anything on that. I am planning to run 32-33" tires and not much of a lift. Thanks.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
will GQ pitman arm fit a MK/MQ power steering box?
will GQ pitman arm fit a MK/MQ power steering box?
1986 Nissan Navara frame swap in progress for MK/MQ chassis
Who is online
Users browsing this forum: No registered users and 148 guests