Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Help! 80 Series front axle Qn

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Help! 80 Series front axle Qn

Post by vSAHARAx »

Hey all, at the moment i am half way through changing the axle seals on a 91 GXL full time 4wd 80 series. one question that is stalling the operation. How hard is it to get the axle back into the diff once i pull it out???? How many people have done this and how difficult was it to do the whole job? I am at the stage now where i can see the CV joint. How much harder does it get? or is it fairly straight forward?

Cheers in advance
Troy
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

Pull and turn to remove push in/down to refit not hard dont be scarred.

Wally.
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Posts: 134
Joined: Thu Sep 15, 2005 9:35 pm
Location: logan qld

re front diff

Post by rampagingturtle »

hey dude
it aint that hard just takes a bit of a wiggling and jiggling , o and hold your tongue just right .
but seriously it is pretty straightforward . the tricky bit is getting the inner seals in straight and undamaged . i use a shocky washer from an old front shock welded to a long 14mm bolt .
anyway good luck .
wish ihad another 80 for spares
now have a new toy.4"lifted n locked t/d 105 series. ya f*#@ken hoo
Top
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

Cheers Fellas everything is off just waiting for the kit and some speedy sleeves :P
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest