Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4 Link Question

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 120
Joined: Mon Jan 02, 2006 6:37 pm
Location: Wanneroo WA

Contact:
Contact Brett S

4 Link Question

Post by Brett S »

I apoligise now if what i am about to describe is not a true 4 link.
Two lower arms and one upper A arm with the top of the A at the diff end.
My question is with the connection to the A arm and diff there is usually a bronze bushed sleave to allow rotational movement, would it be possible to use a trailer bearing setup?(as per swingaway carriers) Would the tapered roller bearings handle the potential hammering?
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

it would be bulky but i see no reason why it wouldn't work. That said the bronze bush idea is much much stronger and more reliable. If you are looking for an alternative look into hyme joints.
Cheers and good luck
Top
Posts: 783
Joined: Sat Jul 09, 2005 6:57 pm
Location: geelong

Post by GQ4.8coilcab »

do u mean a treg offroad trailer hitch. This is very common in low budget cars. Does the job but i would prefer a dedicated joint. Like the one from cheezy racing.
You do not have the required permissions to view the files attached to this post.
[color=red][size=150][b]CTRL + W[/b][/size][/color]
Top
Posts: 120
Joined: Mon Jan 02, 2006 6:37 pm
Location: Wanneroo WA

Contact:
Contact Brett S

Post by Brett S »

Yeah i spose if the bearings failed you could lose the lot.
Top
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

y not just 4 link it and have regualr bushes?
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Top
Posts: 234
Joined: Thu Jan 01, 2004 9:55 pm
Contact:
Contact Mczook

Post by Mczook »

We use custom 360 Swivel joints or 1-1/4in Endura Chromoly Rodends. What ever you choose ensure it can handle the load.

Cheers Sean
If you dont have CTMs you don't know Axle Jack
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 24 guests