Well I just finished my twin stick conversion on my single stick dana20, and it keeps jumping out of low range. It will not stay in 2wd low front, 2wd low rear or low 4wd, even if I push on the leavers. The front will pop out 1st.
I have 2wd high rear and 4wd high; they work with out a problem.
I did not pull the box apart except to sump to clean it out.
Could it be the gears, they looked ok to me??
Or
Could it be the retaining springs?
Eric
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Dana 20 twin stick problems
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Dana 20 twin stick problems
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
I would love a 80 scout but the ensueing (sp?) devorice that came from a new project would but to much to deal withflyinwall wrote:buy my scout for spares you know you want it back
Your scout has a dana18 tcase lower gearing 2.45 vs 2.04 ish but they are not as strong
Also i dont think they fit.
Eric
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
Who is online
Users browsing this forum: No registered users and 2 guests