Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

5AM MAF Help.

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 142
Joined: Mon Nov 10, 2003 6:36 pm
Location: Vic

5AM MAF Help.

Post by Rovernaut »

With the 5AM MAF, hotwire airflow meter.
Are there sensing wires in the main body?
Looking inside the main air tunnel there is a smaller tunnel leading away of the mail on the side.
Just curious, as mine has no visible wires.
( I once looked into another hot wire Maf of a differnet model car and saw 2 platinum wires in the middle of the main air tunnel.)
Top
Posts: 463
Joined: Sun Nov 21, 2004 10:15 pm
Location: Kingston,Hobart, Tasmania

Post by justinC »

they are in the little passageway off to the side, The fact that they don't get the full airflow is not important, the calibration to the ECU is what counts, of the airflow it DOES get - get it?


JC
'92 Rangie Sherwood/turbo intercooled isuzu4BD1 /ACE/ full leather/2.5" exh/2.5" body lift/DeCarbon shocks/LR tanks/LT95 back in and OK now, Sals conversion soon...
Top
Posts: 490
Joined: Sat Oct 30, 2004 3:44 pm
Location: Sydney

Post by Philip A »

The reason you cannot see em is they are DIRTY.
Spray some no residue electronic cleaner in there and Voila , all will be revealed.
Regards Philip A
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests