Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Electronic Free wheeling Hubs Bundeera Import
Moderators: toaddog, Elmo, DUDELUX
Electronic Free wheeling Hubs Bundeera Import
Has anyone had any dealings with these. How do they work. How is power transmitted to the hub I assume 12vdc
The power comes from wires going into the inner end of the stub and running down the stub in flat copper strips to a commutator style with brushes picking up the power for the motor.
When assembling these you have to pin the brushes or they break on the comm. There is a hole you can pin them through.
J Top
When assembling these you have to pin the brushes or they break on the comm. There is a hole you can pin them through.
J Top
Who is online
Users browsing this forum: No registered users and 0 guests