Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BJ73 Diff Centre into 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 68
Joined: Wed Jun 01, 2005 12:36 pm
Location: Albany Creek

BJ73 Diff Centre into 80 series

Post by keencdk »

Hi guys,

I currently have a BJ73 with RD33 ARB Diff Locker (changed carrier bearings), which is also able to be used in the 80 series, installed in the 73.

I am now looking to buy an 80 series cruiser (hzj80) and want to know how easy it will be to swap the diff locker into the 80.

Is it possible to just swap the diff centres (cheap and easy) or do I need to remove the locker from the 73 diff and replace with the original parts, then install the locker into the 80?

Thanks

Craig
Top
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Post by crankycruiser »

All i can tell u for sure is it wont fit in the front....

but if its a rear one it may fit but im not sure.. is it a 4.11??
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

It will bolt straight in the the back all that needs changing could be the pinion flanges may need to be swapped as the drive shaft bolt pattern may be different.

Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 2 guests