Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4.2 GQ Supercharged mount intercooler ideas

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

4.2 GQ Supercharged mount intercooler ideas

Post by Hoonz »

ok i want to get an intercooler off a GU and graft it onto the 4.2 supercharged i have in my wagon .....

on the highway it runs hot
i've done everything ... flushed cooling system ... new thermostat ...
even ran with out thermostat ....

under bonnet temps are up
and the intake pipes are hot to touch from the charger

any other ideas or intercoolers i could graft into the system ...

see pics below of engine bay ...
You do not have the required permissions to view the files attached to this post.
Last edited by Hoonz on Wed Feb 01, 2006 12:24 am, edited 1 time in total.
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 100
Joined: Fri Sep 09, 2005 6:28 pm
Location: Langwarrin

Post by GASDRX »

Your high temps are probably more to do with over fuelling.
Try import wreckers for series 4 to 5 rx7 rotary turbo top mount intercoolers, around $100. Nissan pulsar gtir turbo top mount intercoolers are bigger and more expensive and Nissan skyline r32 to r33 gtst intercoolers also.
Patrol MQ-GQ 2" body lifts $140 SWB, $160 LWB
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

nah its not over fueling ...... if it was it would be sooty ... which it isn't
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

apparently the new pathfinder IC's are being used by lots o dudes in comps and are really cheap, someone mentioned $300 cost
Posts: 71
Joined: Mon Sep 13, 2004 12:50 pm
Location: Melbourne

Front Mount

Post by Not For Highway Use »

If you have room you can buy front mount IC's at the moment for $200 Ne. Check out Melb Trading Post online. More effecient than top mount. Have you lifted the bonnet at the hinges etc?
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Post by Bingham »

what about the old fashioned backwards facing gu scoop/s if a front mount intercooler a possibility? to let some heat out as a part fix only obviously aswell as intercoolers.
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 160
Joined: Sat Feb 26, 2005 7:32 pm
Location: tasmania

Post by turbogu »

go a water to air set up, found these on e-bay, nice and cheap, very small so it would fit in most tight places and looks pretty good

http://cgi.ebay.com.au/BRAND-NEW-WATER- ... dZViewItem
Gu Ute td42t, dzltech turbo, front mount and aus4wd manifold, 18 x 10 rims and 36 15.5 mickey t's for bling
Posts: 760
Joined: Wed Apr 27, 2005 5:33 pm
Location: Melbourne

Post by mikmav »

when it comes to engines, I'm a bit of a novice, but I woulda thought that your air intake being right above the engine wouldn't be helping your temperatures, how about a snorkel to get some cold air in there ?
--
98 GU.. front locker, cheezy sliders, 33's, winch etc.. .... long shopping list.
Posts: 542
Joined: Wed Apr 28, 2004 10:28 am
Location: pomona,sunshine coast

Post by GRINCH »

Hoonz wrote:nah its not over fueling ...... if it was it would be sooty ... which it isn't
could it be running lean then, as this will cause enufe heat to melt pistons etc
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Post by morkz »

As a few people have said you could go front mount intercooler there quite few cheap hybrids ones at the moment.

However I would be more inclined to get more air in the super charger itself. I'd imagine your running a snorkle say the safari units you could remove that and put in place a 3" or preferably a 4" steel snorkle.

I dont think a top mount intercooler from GU would suffice I would suggest getting more into the system and that will also reduce inlet temps as well.

Hobzee ute in the last outback was running no intercooler just 4" snorkle and that alone reduced inlet temps.
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Posts: 108
Joined: Thu Dec 15, 2005 9:56 pm

hmm

Post by Mkdude »

maybe put some heat wrap on your extractors ?or get them jet hot coated as they would be causing the bay to heat up alot...
Posts: 100
Joined: Fri Sep 09, 2005 6:28 pm
Location: Langwarrin

Post by GASDRX »

What supercharger do you have and how much boost are you running?
I have a front mount intercooler on my td42 with no temp issues but you might if its running hot allready.
Patrol MQ-GQ 2" body lifts $140 SWB, $160 LWB
Post Reply

Who is online

Users browsing this forum: No registered users and 37 guests