Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where do i get u-bolts from???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

Where do i get u-bolts from???

Post by matsmad »

I need to get longer u-bolts for my SOA MQ Patrol to fit new springs and the current ones r too short. Where can i buy some or get em made up?
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Contact:
Contact matthewK

Post by matthewK »

can get them from supa cheap, auto barn repco?

but if you want some made up id got to a bolt shop tell them what yur using it for as well so they use the strong stuf :)
1995 land rover disco on 265 muddies
Top
Posts: 342
Joined: Sun Sep 19, 2004 3:49 pm
Location: gippsland vic

Post by ratboy »

spring joint will do it for u
ok it was me
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

i had mine done by a spring shop. they cost me $14 each in 9/16 rod (1/2 standard F150) 13" long.
custom length, custom u size. larger diameter.

shop around, 1 place wanted $25ea!!
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 24
Joined: Tue Jan 24, 2006 9:16 pm

Post by Henry M »

Carrolls Springs can bend custom ubolts from SAE1340 grade 5 material, they only have imperial sizes but will cater for 1/2", 9/16" and 5/8" in grade 5. All ubolt will have approx 90-100mm of UNF roll thread.
Top
Posts: 784
Joined: Mon Nov 15, 2004 8:10 pm
Location: Labrador, Gold Coast

w

Post by matsmad »

Got some today. $30 pair :? from kings springs at ashmore. Fit sweet though!
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests