Hi guys,
i was wondering whether it is possible to run different size rims on a series 1 disco (late 93 built). it seems that there is a much bigger choice of 2nd hand tyres to fit a 15" rim out there than 16's. i'm guessing if u can that it follows that you can run 32" tyres without too many dramas???
andy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
wheel size
Moderator: Micka
I have seen a S1 disco on with 235/85-16s (32") on the stock steel rims and no guard trimming. Didn't have a very close look at it, but I think it only had a spring lift and no BL - but not sure.walker wrote:32's will run ok on a D1....but they wont fit without cutting the guards. The D1 had a lot narrower wheel arches than the D2 so unless you want to start cutting metal, 31's are the biggest you will fit.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 0 guests