Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

LPG Tank location

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 137
Joined: Mon Nov 17, 2003 1:33 pm
Location: Hornsby Heights

LPG Tank location

Post by MQ SWB »

Was wondering where everyone has thier tanks located, In my Rangie it runs across behind the back seat in the 2 door but was thinking of moving it so it runs up/down, fwd/aft you know what I mean on the LHS where the spare use to be. I'm after some photos so i can see how it's done

Also does the cradle have to be engineered/checked out by some one and if anyone knows if I can actually do it legally (I don't mean the cradle) but having the tank there.
TIA

Dixie
There is no such thing as a stupid question only stupid people
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

I think as long as its vented to the outside it should be ok, the cradles are only rhs or angle iron so as long as its secure i cant see any reason why you cant make it yourself. Internally lhs would be my choice of location.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

I have posted photos of my tank mount facing forward to back on the drivers side of the cargo area - I will have a look for them

Tom
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

I did the very same thing in one of my rangies. The tank was mounted east wet behind the back seat and I moved it north south on the left hand side. Very easy to do, particularily if it has flexible lines. As has been said - you need to make sure it is externally vented. Also note the current position of the tank cause if you rotate it, it will affect how much you can put in it.
Warn - Dont leave home without it
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Yep, they need to be mounted so that the vavles sit at 33 or 45 degrees usually, it will say so on the valve fitting.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 137
Joined: Mon Nov 17, 2003 1:33 pm
Location: Hornsby Heights

Post by MQ SWB »

Thanks for that guys, and tom if you can find those photos it would be appreciated. didn't know about the tank angle wondered why it sat like that

Dixie
There is no such thing as a stupid question only stupid people
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

Can't find them but I will head out after lunch and snap some of the rangie with the 86L WC tank that is in there now

Tom
Top
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

The norm is to mount them hard against the side of the car. I had mine out about 10 cm. Was gr8 for easy access and storage of things like tools, oil, water etc. Being a LR product you always want to be able to readily get you hands on these things :lol:
Warn - Dont leave home without it
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

Here is a photo of my tank install

Hope it helps

Tom
You do not have the required permissions to view the files attached to this post.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 2 guests