I've got a 96 Disco TDI with dual bat, and ARB steel bullbar at the moment i'm running king springs Heavey Duty (180lbs/ich i think) with koni shocks in the front. The springs are ment to give a 40mm lift over standard but i think it's more like 20mm. I would like a 3inch lift in the front but don't want to use spacers and and i don't want have springs that are to stiff to flex.
King springs don't really offer any other springs for the front other than fitting raised rears to the front which i tried and it gives about 3 and 1/2 inch lift and makes the ride far to stiff. In the rear i have a 3inch lift with (220lbs/inch). Any ideas would be welcome.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
What Springs For a lift on a TDI Disco
Moderator: Micka
What Springs For a lift on a TDI Disco
88' rangie, 2inch spring lift 1inch body. snorkel Front Air locker Rear Maxi Drive locker, 265/75 BFG mud few other mods.
Have a look here http://members.shaw.ca/jbarge/springinfo.html
Maybe something like 17" free length 220lbs would be suitable..
Maybe something like 17" free length 220lbs would be suitable..
"Why do the British drink their beer at room temperature? Because Lucas builds their refrigerators."
Who is online
Users browsing this forum: No registered users and 1 guest