Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Airlocker Advice

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 33
Joined: Fri Dec 03, 2004 9:21 pm
Location: Gympie

Airlocker Advice

Post by wosat »

A couple of questions for the diff gods :-)

I'm looking at a 2nd hand locker taken out the front of a 85 Hilux. The guy that is selling it reckons that it is a RD02. All of my research tells me that this is wrong and that it must be either a RD01 or a RD23. the RD01 is a 8" diff and a RD02 is a 8.9" diff.
Am I right????

I know that a RD23 suits my ute but will a RD01 fit in the rear of a 2002 Hilux?


Cheers,
Brett
Top
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

Check it out...

http://www.arb.com.au/alac/215109.pdf

RD23 should go in the rear but youll need either a RD90 or RD111 for the front, which one though i havent got a clue, check the above pdf.
Yurich Design Services
www.yds.net.au
Top
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

Check with ARB.

It should be an RD01 in the '85 and I'm pretty sure that will fit an '02 rear with the use of the early model side bearings.

ARB should be able to tell you....
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Top
Posts: 33
Joined: Fri Dec 03, 2004 9:21 pm
Location: Gympie

Post by wosat »

Thanks for the reply.

I checked with ARB on Friday and they said it "should" fit.

I want to try and make sure before I shell out any cash. :)


Cheers,
Brett
Top
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

Hey wosat - did you win it?? i was bidding against you if you did :bad-words: i think it's RD01, Like bee bee said, different bearings and voila!!
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Top
Posts: 33
Joined: Fri Dec 03, 2004 9:21 pm
Location: Gympie

Post by wosat »

Nah, I didn't win it. :cry:
Didn't it take off at the end!
I thought for a while there, nobody was realy interested in it and it would go cheap.

I just hope the winner uses it and just let it go to waste. :lol:
Top
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

yeah i jumped it up about $200 with under 1 minute to go and was winning it at about 30sec mark :D cool - then got smashed in the end. :cry:

Wasn't going above $550 though - very limited description and been burned b4 that way. Was taking it with a grain of salt.
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 43 guests