Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Engine swaps...

Tech Talk for Jeep owners.

Moderator: GUtripper

Post Reply
Posts: 10
Joined: Wed Jan 11, 2006 1:49 am
Location: Toowoomba, Qld

Engine swaps...

Post by Arcadion »

Hello all,

I have a 52 Willys CJ3b with the original f-head hurricane four banger in it. It's seen some hard times and has finally died. I want to take this opportunity to put something else in, that has a little more oomf, and is a little more modern. I don't mind carby engines, but was thinking efi. I have a suzuki sierra as well, and compared to the jeep they are so damn close it's not funny. The sierra has a 1.3, and i can change that to a 1.6l efi motor from a vitara. I was thinking of doing this to the Jeep. Has anyone looked at one of these motors for the jeep? Or has anyone got any other suggestions? I'm not really looking for a 6 or 8 cylinder, but will go 6 if the appeal is there. I don't want to wheelstand the thing, just make it a better daily driver, as well as have some more fun wheeling it in the dirt. Any ideas or suggestions are appreciated!
Posts: 399
Joined: Mon Nov 25, 2002 5:29 pm
Location: Sydney

Post by AussieCJ7 »

I just got rid of a 151cui 4 cyl from a 1983 CJ7 that could have been an option for you while it needed a rebuild you could have had it as I took it to the tip.

Anyway have you considered a small deisel, look in the latest edition of Jeep action they have a story on a guy with a 2a and a izuzu deisel I have seen this Jeep in action and it is a weapon, almost the perfect engine for it

a inline 6 would be too much work so a physically small v6 like the commodore engine is or only real option there and your right a V8 will make it a handful while it can be done you will have very little Jeep left in it when done

4 cyl try looking at a hilux engine while it will be 100% custom it could be an option

just giving you other option's
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Post by Wooders »

pains me to suggest it - but Dunnydoore v6 would be a good option.
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Posts: 69
Joined: Thu Jan 20, 2005 10:10 pm
Location: Gold coast

Post by 74cj6 »

scott at S&Ll offroad has fitted a 350 chev to his CJ2a mabey give him a call and find out what he did
If you come home from a day wheelin and nothing is broken then you wussed out all day!
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Post by CRUSHU »

what about an Isuzu 2.6l efi out of a Rodeo? I have always found them very zippy to drive, even with a load on.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Posts: 19
Joined: Tue Jan 24, 2006 5:57 pm
Location: Gove NT

Post by Matty Ducati »

2.8TD CRD out of a cherokee!
Thats my dream anyhows!!
Cheers Matty

05 Jeep TJ,4" lift, 35s,ARB bar & IPF spots
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 0 guests