Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Grill - replacement headache

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 63
Joined: Tue May 31, 2005 9:58 pm
Location: Carlingford, NSW

GQ Grill - replacement headache

Post by challenger »

GQ Patrol front grill.

Easy to get off (just turn those little square plastic lugs to release), but IMPOSSIBLE to get back on.

How can you line up all the square lugs at the same time?? And even if you attach them to the grill first, there are so many that you will miss/lose/break more than a few.

My solution... (if anyone is interested)

Buy some white plastic square grommets (Repco, SuperCheap Auto or equivalent)- that fit nicely into the metal cutout.

Locate the grill into the two bottom lugs, and use a handfull of screws with washers to screw into the white plastic square grommets.

Five minutes - everything back together.

Hope this helps.

Dave
Dave Golding
0413 743 872
dgolding01@optusnet.com.au
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

I used cable ties which worked a treat aswell
GQ with big nuts
Top
Posts: 2752
Joined: Wed Apr 09, 2003 10:46 pm
Location: Carrum Downs Vic

Contact:
Contact CRUSHU

Post by CRUSHU »

I had no problem putting mine back. Put all the clips into the grille first, then start at one end use a small screwdriver or other pushing device to point the clips into the holes.
www.CVEPerformance.com

Crushu F150 Buildup: http://www.outerlimits4x4.com/ftopic21987.php&highlight=crushu
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

yeh thats how i do mine .. easy as when u clip them all into the grill first
then just refit the grill 2min job
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Tek screws. Cant get any easier/ bodgier than that
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

Cage nuts with stainless steel screws work very well also..

Nick
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Woop wrote:Cage nuts with stainless steel screws work very well also..

Nick
I got a about 100 of em here :D when we doin mine dude? I gotta re-route my ariel cables from going thru the grill.. U got time to assist with the cables?
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

Should be able to do it without having to remove the grill mate. Unsloder cable and pull back through grill--- I forgot to add, that i used a very small flat blade file and slightly enlarged the slots so that the cage nuts slotted in a bit easier. I used stainless 3/16 screws and washers. No rattles and easy to remove. Run antenna cables under the bottom of the grill and up the back of the bullbar post to antenna mount (ARB)

Nick
Top
Posts: 74
Joined: Mon May 17, 2004 10:30 pm
Location: sunshine coast, QLD

Post by Terry_Toyota »

ZIP TYS
Live it, Love it, Don't waste it ;)
Top
Posts: 502
Joined: Thu Dec 01, 2005 12:09 pm
Location: Cairns

Post by fnqcairns »

Look I agree! those nissan clips are a bloody joke. after ringing to ensure there was no TAFE accredited course I had to do before refitting the grill, I went back down stairs and finally nutted it out after much swearing.
I couldn't find anywhere zipties would secure neatly on mine so next time I will be ready with replacement aftermarket screws and clips. Thanks for the tip.

cheers fnq
*JUST LUV IT* 96 GQ LWB TD4.2, Cav, Kings, Dobinsons, Motorguard, Enginesaver, 400 pro, Cooper ST's (rolls eyes), fleetguard oil filters, Delo 400 engine oil, Delo ESI gearbox oil and an RTC.
Top
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

CRUSHU wrote:I had no problem putting mine back. Put all the clips into the grille first, then start at one end use a small screwdriver or other pushing device to point the clips into the holes.
BINGO i tryed the other way then the way you described.worked a treat .
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 121 guests