Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

towbar wire codes

For all things Electrical.

Moderator: -Scott-

Post Reply
User avatar
stu
Posts: 913
Joined: Wed Jan 22, 2003 8:08 am
Location: brisbane

towbar wire codes

Post by stu »

i can't find the right wiring color codes specific for a towbar. even looked on the net under "towbar wiring standards" and all i got was BS.

white = earth
black =
yellow =
blue =
green =
red = brake light

can anyone help me out here.
i don't need no stinking quote for my sig. line!
Posts: 214
Joined: Fri Jul 16, 2004 10:23 pm
Location: Brisbane, Aus.

Post by barbz »

white = earth
black = reverse
yellow = left hand turn
blue = service brakes (electric brake controller)
green = right hand turn
red = brake light

Should be another for rear lamps i would think....brown?


Paul
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

barbz wrote:white = earth
black = reverse
yellow = left hand turn
blue = service brakes (electric brake controller)
green = right hand turn
red = brake light

Should be another for rear lamps i would think....brown?

Paul
Don't know about the black and blue wires, but the other colours are what I have used.

Scott
User avatar
stu
Posts: 913
Joined: Wed Jan 22, 2003 8:08 am
Location: brisbane

Post by stu »

NJ SWB wrote:
barbz wrote:white = earth
black = reverse
yellow = left hand turn
blue = service brakes (electric brake controller)
green = right hand turn
red = brake light

Should be another for rear lamps i would think....brown?

Paul
Don't know about the black and blue wires, but the other colours are what I have used.

Scott
you saying that these should be swapped, or you are just comfortable with the allocations of the others.

cheers!
i don't need no stinking quote for my sig. line!
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I've not wired trailer brakes or reversing lights. But tail lights, brake lights and indicators, the colours are what I used.

Cheers,

Scott
Posts: 214
Joined: Fri Jul 16, 2004 10:23 pm
Location: Brisbane, Aus.

Post by barbz »

Have you got an automotive test lamp or anything? thats the easiest way to confirm what each does.

The colours i listed yesterday were from the narva site and matched the wiring of the tjm harness i picked up.

Paul
User avatar
stu
Posts: 913
Joined: Wed Jan 22, 2003 8:08 am
Location: brisbane

Post by stu »

barbz wrote:.....The colours i listed yesterday were from the narva site and matched the wiring of the tjm harness i picked up.

Paul
good answer, that what i'll go with then
i don't need no stinking quote for my sig. line!
Posts: 34
Joined: Thu Mar 17, 2005 11:00 am
Location: Melbourne, Burwood East

Post by borisr33 »

the info here might be helpfull

http://www.narva.com.au/Trailer_1.html
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests