Just wondering if anybody can offer me an answer to this one (before I start pulling things out).
I have an MQ SWB with the L28 and 4 speed and have acquired a LWB MQ with a V8 and 5 speed gearbox and bellhousing adapter (body is real crap). Is the swap of the 5 speed and V8 a simple bolt in job into the SWB ie use the same mounts for the motor and gearbox and maybe just shorten/lengthen the drive shafts.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
V8 and 5 speed in MQ
id say the mounting will be off 
simple as cutting off the old mounts bolt the new ones to the motor so when you lower it in can tack it all up on the chasi then take motor out and run full welds on them
probly have tyo do the same for the gbox and
shorten or legthen the drive shafts
when is all done take to engineer he must be happy with and the saftey of work and should pass with a smile on face if its spot on
simple as cutting off the old mounts bolt the new ones to the motor so when you lower it in can tack it all up on the chasi then take motor out and run full welds on them
probly have tyo do the same for the gbox and
shorten or legthen the drive shafts
when is all done take to engineer he must be happy with and the saftey of work and should pass with a smile on face if its spot on
1995 land rover disco on 265 muddies
Who is online
Users browsing this forum: No registered users and 24 guests