Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How much for Sunraysia's for 100 series?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 959
Joined: Fri Mar 07, 2003 6:51 pm
Location: Gladstone QLD

How much for Sunraysia's for 100 series?

Post by Kramer »

Went to tyrepower yesterday looking for some sunny's for my solid axle 100 series, need 16 inch i was told, and they want $100 each :shock: I used to be able to get 15x8 inch sunnys for my 60 for $45ea new!

How much should I pay for rims?

Might wait till some come up here again!
Posts: 8
Joined: Tue Feb 07, 2006 6:52 pm
Location: Hobart

Post by taslux »

Yeah, when I had my 100 series I had the same problem. I wanted 8" wide rims cause i only had the skinny 6".

After similar problems i ended going to the local Toyota dealer to check out their price on standard 8" steel rims ......$250!!!!! The GXL alloys were the same price!! I asked what gives and the bloke behind the counter said that all cruisers come from japan with steel wheels and the alloys are put on locally.

So i asked if they all come with steel wheels what happens to them when the alloys are fitted. I was given the blokes phone number who changes them. I walked away with 4 rims for $200 and he walked away with $200 in his back pocket.

Maybe you might have the same luck!
.......................................................................
1995 80 Series GXL 1HD-FT, 4" Lift, 305/70 MTZ's
.......................................................................
Posts: 959
Joined: Fri Mar 07, 2003 6:51 pm
Location: Gladstone QLD

Post by Kramer »

Yeah will have to try that thanks!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest