Hi,
Just wondering if anybody could tell me how to remove the gearlevers from the gearbox while it is still attached to the mounts. I have access to the levers from the top.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gearlever removal of MQ box
yea, for the main lever just unscrew the collar on top of the gearbox, anti clockwise, you could use a pin punch and hammer or some vise grips, it then lifts out.
For the transfer lever just get underneath and there is a cotter pin and a nut (like on the old push bike cranks) at the bottom of the lever undo the nut, tap out the pin - it may be a bit seized and wiggle the lever off to the side.
For the transfer lever just get underneath and there is a cotter pin and a nut (like on the old push bike cranks) at the bottom of the lever undo the nut, tap out the pin - it may be a bit seized and wiggle the lever off to the side.
There are no stupid questions, but there are a LOT of inquisitive idiots
Who is online
Users browsing this forum: No registered users and 23 guests