Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gas air cleaner boxes

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 17
Joined: Wed Dec 21, 2005 1:49 am
Location: Melbourne

Gas air cleaner boxes

Post by mick355 »

G'day guys. Just wondering what everyone is running with a carby tb42 on gas. I have an Impco 300a mixer and that stupid plastic air box that you cannot seal :bad-words: I want to fit a snorkel but not until i fix this issue first. Was thinking maybe something of an old school carby v8.
Any info would be great.
Cheers
Mick
Top
Posts: 3054
Joined: Mon Nov 03, 2003 4:30 pm
Location: Melbourne

Post by hottiemonster »

silicone is your friend and lots of it. :D

thats what i do, but i wouldnt mind finding a better solution.
Gq ute new built
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

I would like to know also. As I currently have my aircleaner exposed to the engine bay.
But would like to give the aircleaner the flick. Put the mixer etc in a box. Then run the air-intake to the other side of the engine bay. And proably use something like an 80series/hilux aircleaner setup. Then to the snorkle. As this would give a good sealled system, filters that are cheap. And no need to silcon the aircleaner box or remove gas hoses just to change the air filter.
THOUGHT FOR THE DAY....
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Don't know much about gas but doesn't the mixer just sit on top of the carby?

Why not get a 90 degree bend made to fit and screw onto the mixer intake (sort of the like a snorkel but right angle) and then flexible pipe to a seperate air cleaner like the late model turbo diesels. Then pipe to snorkel.
KRiS
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Actually, I'm sure I've seen what I'm thinking of on the big chev diesel V8s?!?! :?
KRiS
Top
Posts: 1068
Joined: Mon May 31, 2004 2:41 pm
Location: in the ghetto

Contact:
Contact morkz

Post by morkz »

why not just build an air box system.

On the my GQ instead of buying a donaldson air cleaner i'm going to make up a steel box and look at putting in a finer filter or something inside that...
---------------------------------------------
04 GU TD6 wagon with some ARB stuff
---------------------------------------------
Morkz Media Web and Graphic Design
Also webhosting and domain registration.
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

Easy as on a std intake. As it just has a flange or bit of round which you can clamp something onto.
But TB42(CARBY) has this gas mixer thing on top (its an impco 300A). With the air filter around it.
So thinking we shoud be able to build a box around it and run it to a better system
THOUGHT FOR THE DAY....
Top
Posts: 104
Joined: Thu Jan 26, 2006 2:07 pm
Location: Gippsland vic

Post by Fozdick »

something like this maybe?
You do not have the required permissions to view the files attached to this post.
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

Fozdick wrote:something like this maybe?
Yep thats the type of thing I am after. And being a DYNA aircleaner. It is probable out of the same parts bin as the 80series or hilux.
THOUGHT FOR THE DAY....
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

you can get them.... ive got a plastic impco snorkel job on mine with the 300a setup and with a little silocone it seals fine ;)
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

This is what I was thinking but I wasn't aware of how the mixer design was ...


Image
KRiS
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

When I had mine I sealed the aircleaner by glueing 1/2" hose insulation around bottom plate. Slipped top on and it pushed hard enough against foam to seal. Never had any probs and I fitted a snorkel too.

bazzle
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 13 guests